Installation Guide

10
Hendrick
TM
Fig. 20
Fig. 21
14. OPERATING INSTRUCTIONS
IInstall 2, 3 volt (#2032) batteries included with
the CoolTouch
TM
Control System. (Fig. 20)
Note: To prevent damage to the transmitter,
remove these batteries if not used for long
periods of time (months).
Restore power to ceiling fan and test for
proper operation.
A. , , and buttons:
These three buttons are used to set the
fan speed as follows:
= high speed
= medium speed
= low speed
B. button:
This button turns the fan off.
C. The " " and " " button:
The " " button turns the upper light ON
or OFF and also controls the brightness
setting. The " " button turns the bottom light
ON or OFF. Press and hold the button to set
the desired brightness. The light key has an
auto-resume, it will stay at the same
brightness as the last time it was turned off.
D. The " " button is used to set the fan
forward or reverse, press the button forward
(for warm weather) or reverse (for cool
weather).
13. INSTALLING THE BATTERY