ITEM #0649838 2-LIGHT PENDANT Kichler® is a registered trademark of The L.D. Kichler Co. All Rights Reserved. MODEL #34758 Français p. 10 Español p. 19 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-554-6504, 8 a.m. - 4:30 p.m, EST, Monday - Friday.
PACKAGE CONTENTS B A D C H I K L N M J F G P F O F E PART A B C D E F G H DESCRIPTION Canopy Mounting Bracket Threaded Nipple Hex Nut Socket Coupling Short Threaded Nipple Screw Collar Ring QTY 1 1 1 4 2 1 1 1 PART I J K L M N O P 2 DESCRIPTION Screw Collar Loop Decorative Top Chain Fixture Loop Threaded Nipple Cover Decorative Arm Socket Cover Fixture Top QTY 1 1 1 1 1 1 2 1
HARDWARE CONTENTS AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 CC DD Thumbscrew Qty: 2 Threaded Knob Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity.
ASSEMBLY INSTRUCTIONS 1. Screw short threaded nipple (G) onto coupling (F). 1 G F 2. Lower decorative top (J), threaded nipple cover (M), and decorative arm (N) over the short threaded nipple (G) and secure with fixture loop (L). 2 L N M J G 3. Pass thumbscrews (CC) through decorative arm (N) and fixture top (P) and secure using threaded knobs (DD).
ASSEMBLY INSTRUCTIONS 4. Position threaded nipple (C) in mounting bracket (B) so that, when mounted: • • The threaded nipple (C) will protrude a minimum of ¼ inch beyond the raised center portion of the bracket (B). The threaded nipple (C) height should be positioned so that ½ the exterior threads of the screw collar loop (I) will extend past the canopy (A), when it is mounted. 5.
ASSEMBLY INSTRUCTIONS 7. Using the open chain links on chain (K), attach one end to screw collar loop (I) and the other end to fixture loop (L). Weave the fixture electrical and ground wires through every other chain link and pass through threaded nipple (C) into outlet box. Lower the screw collar ring (H) and canopy (A) over the chain (K). 7 Outlet Box I C K A H L 8.
ASSEMBLY INSTRUCTIONS 9. Pass canopy (A) over the screw collar loop (I). Attach screw collar ring (H) to screw collar loop (I) to secure canopy (A). 9 A I H 10. Lower socket cover (O) over socket (E). Insert 60-watt max. candelabra-base bulb (not included) into socket (E). 10 Repeat for remaining sockets. O E CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture.
WARRANTY Kichler Lighting warrants that its products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser. To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly defective parts or products to the authorized Kichler distributor that the product was purchased from with PROOF OF PURCHASE, Original Purchaser’s name and return address and a description of the claimed product defect.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-800-554-6504, 8 a.m. - 4:30 p.m., EST, Monday - Friday.
ARTICLE #0649838 LUMINAIRE SUSPENDU À 2 LUMIÈRES Kichler® est une marque déposée de The L.D. Kichler Co. Tous droits réservés. MODÈLE #34758 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner le produit à votre détaillant, appelez notre service à la clientèle au 1-800-554-6504, entre 8 h et 16 h 30 (HNE) du lundi au vendredi.
CONTENU DE L’EMBALLAGE B A D C H I K L N M J F G P F O F E PIÈCE A B C D E F G H DESCRIPTION Pavillon Support de fixation Raccord fileté Écrou hexagonal Douille Raccord Raccord fileté court Bague de l'anneau du pavillon QTÈ 1 1 1 4 2 1 1 1 PIÈCE DESCRIPTION QTÈ I 1 Anneau de suspension du pavillon J Capuchon décoratif 1 1 K Chaîne 1 L Anneau de suspension du luminaire M Cache raccord fileté 1 N 1 Bras décoratif O 2 Cache douille P 1 Dessus du luminaire 11
QUINCAILLERIE INCLUSE AA BB CC Vis manuelle Capuchon de connexion Vis à Qté : 2 Qté : 3 métaux courte Qté : 2 DD Bouton fileté Qté : 2 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Coupez l’électricité avant TOUTE manipulation.
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Vissez le raccord fileté court (G) dans le raccord (F). 1 G F 2. Placez le capuchon décoratif (J), le cache raccord fileté (M) et le bras décoratif (N) sur le raccord fileté court (G) et fixez à l'aide de l'anneau de suspension du luminaire (L). 2 L N M J G 3. Faites passer les vis manuelles (CC) à travers le bras décoratif (N) et le dessus du luminaire (P) et fixez de l'aide des bouton fileté (DD).
INSTRUCTIONS POUR L'ASSEMBLAGE 4. Positionnez le raccord fileté (C) dans le support de fixation (B) de sorte que, une fois le montage effectué : • 4 5. Lorsque les positions correctes du raccord fileté (C) et du support (B) ont été déterminées, fixez à l'aide de 3 écrous hexagonaux (D), comme suit : • • • Vissez le 1er écrou hexagonal (D) sur le raccord fileté (C) et serrez-le contre la partie saillante du support (B).
INSTRUCTIONS POUR L'ASSEMBLAGE 7. À l'aide des anneaux ouverts de la chaîne (K), attachez une extrémité de la chaîne à l'anneau de suspension du pavillon (I) et l'autre extrémité à l'anneau de suspension du luminaire (L). Tressez le fil de terre et les fils électriques du luminaire à travers un maillon sur deux de la chaîne et faites-les passer à travers le raccord fileté (C) puis dans la boîte de sortie. Abaissez la bague de l’anneau du pavillon (H) et le pavillon (A) le long de la chaîne (K).
INSTRUCTIONS POUR L'ASSEMBLAGE 9. Faites passer le pavillon (A) sur l'anneau de suspension du pavillon (I). Attachez la bague de l'anneau du pavillon (H) à l'anneau de suspension du pavillon (I) pour fixer le pavillon (A). 9 A I H 10. Placez le cache douille (O) par-dessus la douille (E). Insérez une ampoule à culot candélabre de 60 watts max. (non fournie) dans la douille (E). 10 Répétez l'opération pour les douilles restantes.
GARANTIE Kichler Lighting garantit que ses produits seront libres de tout vice de fabrication ou défaut matériel pendant un (1) an à compter de la date d'achat par l'acheteur initial.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1-800-554-6504, entre 8 h et 16 h 30 (HNE), du lundi au vendredi.
ARTÍCULO #0649838 Kichler® es una marca registrada de The L.D. Kichler Co. Todos los derechos reservados. LÁMPARA COLGANTE DE 2 LUCES MODELO #34758 ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de devolverlo a la tienda, llame a nuestro departamento de servicio al cliente al 1-800-554-6504, de 8:00 a.m. a 4:30 p.m. hora del Este (EST), de lunes a viernes.
CONTENIDO DEL PAQUETE B A D C H I K L N M J F G P F O F E PIEZA A B C D E F G H DESCRIPCIÓN Cubierta Soporte de montaje Manguito roscado Tuerca hexagonal Portalámparas Acoplamiento Manguito roscado corto Anillo de cuello roscado CANT 1 1 1 4 2 1 1 1 PIEZA I J K L M N O P 20 DESCRIPCIÓN CANT 1 Bucle de cuello roscado Capuchón decorativo 1 1 Cadena 1 Bucle para colgar la lámpara Cubierta del manguito roscado 1 1 Brazo decorativo 2 Cubierta del portalámparas 1 Caperuza de la lámpara
ADITAMENTOS AA Conector de cables Cant.: 3 BB Tornillo corto para metales Cant.: 2 CC DD Perillas Tornillo de roscadas apriete manual Cant.: 2 Cant.: 2 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. • • • • • ADVERTENCIA IMPORTANTE: NUNCA intente hacer trabajos sin desconectar el suministro eléctrico. Coloque el interruptor de alimentación principal en la posición “OFF” (APAGADO).
INSTRUCCIONES DE ENSAMBLAJE 1. Atornille el manguito roscado corto (G) al acoplamiento (F). 1 G F 2. Baje el capuchón decorativo (J), la cubierta del manguito roscado (M) y el brazo decorativo (N) sobre el manguito roscado corto (G) y fíjelos con el bucle de la lámpara (L). 2 L N M J G 3. Pase los tornillos de ajuste manual (CC) por el brazo decorativo (N) y la caperuza de la lámpara (P) y fíjelos en el perillas roscadas (DD).
INSTRUCCIONES DE ENSAMBLAJE 4. Coloque el manguito roscado (C) en el soporte de montaje (B), de manera que al quedar montado: • • • • B ¼ pulgados C El manguito roscado (C) sobresalga un mínimo de 6.35 mm (1/4") encima de la porción central elevada del soporte (B). La altura del manguito roscado (C) esté colocada de manera que la mitad de las roscas exteriores del bucle de cuello roscado (I) sobresalga encima de la cubierta (A) cuando esté montada. . 5.
INSTRUCCIONES DE ENSAMBLAJE 7. Usando los eslabones abiertos en la cadena (K), fije un extremo al bucle de cuello roscado (I) y el otro extremo al bucle de colgar la lámpara (L). Entrelace los cables eléctricos y a tierra de la lámpara por los eslabones, uno sí y otro no, y páselos por el manguito roscado (C) a la caja eléctrica. Deslice el anillo de cuello roscado (C) y la cubierta (A) por encima de la cadena (K). 7 Caja de C salida I K A H L 8.
INSTRUCCIONES DE ENSAMBLAJE 9. Pase la cubierta (A) sobre el bucle de cuello roscado (I). Fije el anillo de cuello roscado (H) al bucle de cuello roscado (I) para fijar la cubierta (A). 9 A I H 10.Baje la cubierta del portalámparas (O) sobre el portalámparas (E). Inserte un foco de base para candelabro de máximo 60 W (no se incluye) en el portalámparas (E). 10 Repita para los portalámparas restantes.
GARANTÍA Kichler Lighting garantiza que sus productos estarán libres de defectos de materiales o mano de obra por un (1) año a partir de la fecha de compra por el Comprador Original.
LISTA DE PIEZAS DE REPUESTO Para repuestos, llame a nuestro departamento de servicio al cliente al 1-800-554-6504, de 8:00 a.m. a 4:30 p.m. hora del Este (EST), de lunes a viernes.