Instructions / Assembly

Universal LED Light Kit | 7
INSTALLING THE LIGHT KIT
(continued)
7. Raise and hold the light kit assembly close to the mounting plate of
the ceiling fan. Push the square wire connectors together. (Fig. 5)
NOTE: The square connectors are color coded. Match the color
coded sides of each plug and push. They will attach ONLY when
matched correctly.
8. Carefully push all wires back into the switch housing, then install
the light kit assembly onto the mounting plate using the 3 switch
housing screws. Be sure to tighten all screws. (Fig. 5)
9. Your installation is now complete. Restore electrical power and
enjoy your new ceiling fan light kit.
Fig. 5
Mounting Plate
Square Connectors
Light Kit Assembly
Screws