Installation Guide

4
ASSEMBLY INSTRUCTIONS
2. Orient the mounting bracket (B) so the raised
center portion protrudes into the outlet box (not
included). Insert long machine screws (DD)
through mounting bracket (B) so they protrude
outward. Connect the mounting bracket (B) to
the outlet box with short machine screws (BB).
1. Screw center tube (D) onto canopy (A). Next,
screw mounting surface (C) onto center tube
(D).
Short Machine
Screw
Long Machine
Screw
x 2
x 2
BB
DD
Hardware Used
2
Outlet Box
B
DD
BB
Note: The electrical cable will need to get pulled
through the individual parts as they are installed
on this and later steps. Trim extra cabling
leaving six inches of extra wire protruding from
the canopy.
1
A
C
D