Installation Guide

4
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
1
Short Machine
Screw
Long Machine
Screw
x 2
x 2
BB
DD
Hardware Used
1. Orient the mounting bracket so the raised center
portion faces up. Insert long machine screws
(DD) through mounting bracket (A) so the long
machine screws (DD) protrude downward.
Connect the mounting bracket (A) to the outlet
box with short machine screws (BB).
Outlet Box
DD
A
BB
Hardware Used
x 3Wire Connector
AA
2. Wire connection guide:
Ground wire:
• For installation in the United States: Wrap
ground wire from outlet box around ground
screw on mounting bracket (A) no less than 2
in. from wire end. Tighten ground screw. If
fixture is supplied with a ground wire, connect
to outlet ground wire with a wire connector
(AA).
• For installation in Canada: If fixture is
supplied with ground wire, wrap ground wire
around ground screw on mounting bracket (A).
Tighten ground screw.
Supply wires:
• Connect the Neutral (White) supply wire from
the outlet box to the Neutral (White) fixture
wire.
• Connect the Hot (Black) supply wire from the
outlet box to the Hot (Black) fixture wire.
2
BARE COPPER,
OR GREEN
GROUND
SUPPLY WIRE
BARE COPPER,
OR GREEN
GROUND
FIXTURE
WIRE
BLACK FIXTURE
WIRE
WHITE FIXTURE
WIRE
BLACK SUPPLY
WIRE
WHITE SUPPLY
WIRE
AA