Installation Guide

ASSEMBLY INSTRUCTIONS
5
3a. Pass canopy (B) over long machine screws
(DD) protruding from mounting bracket (A).
Secure in place with threaded knobs (CC).
3a
4
Threaded Knob
x 2
CC
Hardware Used
DD
B
CC
4. Lift shade (G) by canopy collar (C). Align the
canopy collar’s “L” shaped slots to the canopy
(B) thumbscrews (F). Lift collar (C) until it
touches the ceiling and twist clockwise until the
thumbscrews are positioned at the bottom of the
“L” slots. Tighten the thumbscrews (F) to
secure.
B
C
F
G
2
1
3b
NOTE: The bottom edge of an outlet box
should be flush with the bottom surface of a
ceiling. However, many boxes are recessed
into the ceiling. The long machine screws
(DD) are designed to have extra length to
accommodate to various box depths.
3b.
1) The long machine screws (DD) may, at
first, protrude too far past the surface of the
canopy (B).
2) Screw the threaded knobs (CC) onto the
long machine screws (DD). The screws will
back thread into the mounting bracket (A)
until the canopy (B) is tight against the
ceiling.
B
CC
DD