Installation Guide

ASSEMBLY INSTRUCTIONS
5
3. Pass canopy (B) over the long machine
screws (DD) protruding from mounting bracket
(A) then secure in place with lock washers
(EE) and threaded knobs (CC).
3
Threaded Knob x 2
CC
Hardware Used
Lock Washer x 2
EE
4. Screw threaded nipple (D) into coupling (C)
and secure with hex nut (I).
4
DD
B
EE
CC
C
NOTE: The bottom edge of an outlet box
should be flush with the bottom surface of a
ceiling. However, many boxes are recessed
into the ceiling. The long machine screws
(DD) are designed to have extra length to
accommodate to various box depths.
3b.
1) The long machine screws (DD) may, at
first, protrude too far past the surface of the
canopy (B).
2) Screw the threaded knobs (CC) onto the
long machine screws (DD). The screws will
back thread into the mounting bracket (A)
until the canopy (B) is tight against the
ceiling.
2
1
3b
B
CC
D
I
A
DD
Outlet Box