Installation Guide

ASSEMBLY INSTRUCTIONS

CARE AND MAINTENANCE

TROUBLESHOOTING

Fixture does not light. 1. Fixture may be wired incorrectly.

1. Check wiring.

2. Worn or broken bulb. 2. Replace bulb.

1. Check wiring.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

• Always be certain that electric current is turned off before cleaning this item.

• Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on

fixture, as it will damage the metal finish.

Insert 60-watt max. E12 candelabra bulb or

CFL/LED equivalent (none included) into

socket (E).

Repeat for remaining sockets.

5b.

NOTE: The bottom edge of an outlet box

should be flush with the bottom surface of a

ceiling. However, many boxes are recessed

into the ceiling. The long machine screws

(DD) are designed to have extra length to

accommodate to various box depths.

1) The long machine screws (DD) may, at

first, protrude too far past the surface of the

canopy (B).

2) Screw the threaded knobs (CC) onto the

long machine screws (DD). The screws will

back thread into the mounting bracket (A)

until the canopy (B) is tight against the

ceiling.

Outlet Box