Installation Guide

4
ASSEMBLY INSTRUCTIONS
1. Screw threaded pipe (C) through washer (F) and
into coupling (G). Lower decorative tube (D) over
threaded pipe (C).
2. Lower canopy (A) over threaded pipe (C) and
secure with lock washer (I) and hex nut (H).
2
I
C
H
A
1
Note: The electrical cable will need to get pulled
through the individual parts as they are installed
on this and later steps.
D
F
C
G
3
Short Machine
Screw
Long Machine
Screw
x 2
x 2
BB
DD
Hardware Used
3. Orient the mounting bracket (B) so the raised
center portion faces up. Insert long machine
screws (DD) through mounting bracket (B) so
the long machine screws (DD) protrude
downward. Connect the mounting bracket (B) to
the outlet box with short machine screws (BB).
Outlet Box
DD
B
BB