Installation Guide
LOOP/CHAIN/LOOP MOUNT
1) Pass wire through stems and screw stems into couplings on top of
xturebody.NOTE: Threadlockingcompoundmustbeappliedtoall
stemthreadsasnotedwithsymbol(3) to prevent accidental rotation of
xtureduringcleaning,relamping,etc.
2) Passxturewirethroughremainingstemsandscrewstemstogether.
3) Screwsmallthreadedpipeintoendofeachloop.
4) Screwloopsontoendofeachstem.
5) Passthreadedpipeatendofeachloopthroughholesincanopy.
6) Slip one lockwasher over end of each threaded pipe protruding from
insideofcanopyandscrewhexnutontoendofeachthreadedpipe.
7) Attachchainlinktosmallloopatendofstemandtolooponcanopy.
8) TURN OFF POWER.
IMPORTANT:Beforeyoustart,NEVERattemptanyworkwithout
shuttingofftheelectricityuntiltheworkisdone.
a) Gotothemainfuse,orcircuitbreaker,boxinyourhome.Place
themainpowerswitchinthe“OFF”position.
b) Unscrewthefuse(s),orswitch“OFF”thecircuitbreakerswitch(s),
thatcontrolthepowertothextureorroomthatyouareworkingon.
c) Placethewallswitchinthe“OFF”position.Ifthexturetobe
replacedhasaswitchorpullchain,placethoseinthe“OFF”
position.
9) Threadhexnutontothreadedpipesothat5threadsareexposedabove
hexnut.Threadthatendofthethreadedpipeintomountingstrap
andtightenhexnutagainstmountingstrap.Screwsecondhexnut
ontoendofthreadedpipeprotrudingfrombackofmountingstrap.
10)Attachmountingstraptooutletbox.(Screwsnotprovided.)
11) Groundinginstructions:(SeeIllus.AorB).
A) Onxtureswheremountingstrapisprovidedwithaholeandtwo
raiseddimples.Wrapgroundwirefromoutletboxaroundgreen
groundscrew,andthreadintohole.
B) Onxtureswhereacuppedwasherisprovided.Attachground
wirefromoutletboxundercuppedwasherandgreenground
screw,andthreadintomountingstrap.
Ifxtureisprovidedwithgroundwire.Connectxturegroundwireto
outletboxgroundwirewithwireconnector(notprovided.)afterfollowing
theabovesteps.Neverconnectgroundwiretoblackorwhitepower
supplywires.
12)Makewireconnections(connectorsnotprovided).Referencechartbelow
forcorrectconnectionsandwireaccordingly.
13)Pushxturetoceiling,carefullypassingthreadedpipethroughhole.
14)Securexturetoceilingwithnial.
15)Insertsuppliedbulb.
16)Sliponesmallrubberwasherontoeachthumbscrew.
17)Raiseglassuptoxture.Passholeinglassoverbulb.
18)Alignholesinsideofglasswithholesinringonsocket.
19)Carefullypushendofthumbscrewintoholeinglassandthread
thumbscrewintoholeinsideofringonsocket.
MONTAJE DE LAZO/ ESLABÓN DE CADENA
1) Paseelalambredelartefactoatravésdelvástagoyatornilleelvástago
altopedelartefacto.NOTA:Elcompuestopararoscaestancasedebe
aplicaratodaslasroscasdelvástagocomosenotóconelsímbolo(3)
paraimpedirlarotaciónaccidentaldelartefactodurantelalimpieza,
instalacióndeunabombillanueva,etc.
2) Paseelalambredelartefactoatravésdelosvástagosrestantesy
atornillelosvástagosjuntos.
3) Atornilleeltuboroscadoenelextremodecadalazo.
4) Atornilleloslazosenelextremodecadavástagos.
5) Pasecadatuboroscadoenloslazosatravésdelosagujerosenel
escudete.
6) Resbaleunaarandeladeseguridadencimadecadavástagoyatornille
latuercahexagonalenelextremodecadavástago.
7) Acopleuneslabóndecadenaallazopequeñoenelextremodelvástago
yallazoenelescudete.
8) APAGUE LA ALIMENTACIÓN ELÉCTRICA.
IMPORTANTE: Antesdecomenzar,NUNCAtratedetrabajarsinantes
desconectarlacorrientehastaqueeltrabajosetermine.
a) Vayaalacajaprincipaldefusibles,ointerruptorocajadecircuitos
desucasa.Coloqueelinterruptordelacorrienteprincipalen
posicióndeapagado“OFF”.
b) Desatornilleel(los)fusible(s),ocoloqueelinterruptoro
interruptoresdelbreakerenposicióndeapagado“OFF”,que
controla(n)lacorrientehaciaelartefactoohabitacióndondeestá
trabajando.
c) Coloqueelinterruptordeparedenposicióndeapagado“OFF”.Si
elartefactoquesevaareemplazartieneuninterruptorocadena
quesejala,colóquelosenlaposicióndeapagado“OFF”.
9) Enrosquelatuercahexagonaleneltuboroscadodetalformaque5
roscasestéexpuestassobrelatuercahexagonal.Enrosqueese
extremodeltuboroscadoenlabarrademontajeyaprietelatuerca
hexagonalcontralabarrademontaje.Atornillelasegundatuerca
hexagonalenelextremodeltuboroscadoquesobresaledeatrásdela
abrazaderademontaje.
10)Unalabarrademontajealacajadesalida.(nosesuministranlos
tornillos).
11) InstruccionesdeconexiónatierrasolamenteparalosEstados
Unidos.(VealailustracionAoB).
A) Enlaslámparasquetieneneleje,demontajeconunagujeroy
doshoyuelosrealzados.Enrollarelalambreatierradelacaja
tomacorrientealrededordeltornilloverdeypasarloporelaquiero.
B) Enlaslámparasconunaarandelaacopada.Fijarelalambrea
tierradelacajatomacorrientedelajodelaarandelaacoaday
tornilloverde,ypaserporelejedemontaje.
Silalámparavieneconalambreatierra.Conecterelalambreatierra
delalámparaalalambreatierradelacajatomacorrienteconun
conectordealambres(noincluido)espuésdeseguirlospasos
anteriores.Nuncaconectarelalambraatierraalosalambreseléctros
negrooblanco.
12)Hagalesconexionesdelosalambres(noseproveenlosconnectores.)
Latabladereferenciadeabajoindicalasconexionescorrectasylos
alambrescorrespondientes.
13)Empujeelartefactocontraeltecho,pasandocuidadosamenteeltubo
roscadoatravésdeloricio.
14)Fijeelartefactoaltechousandoelcapuchon.
15)Insertelabombillaincluida.
16)Desliceunapequeñaarandeladecauchoporencimadecadatornillo
demariposa.
17)Levanteelvidriohastaelartefacto.Paseeloricioubicadoenelvidrio
porencimadelabombilla.
18)Alineelosoricioslateralesdelvidrioconlosoriciosdelanillodel
portalámparas.
19)Empujeconcuidadoelextremodeltornillodemariposadentrodel
oricioubicadoenelvidrioyenrosqueeltornillodemariposaenel
oriciolateraldelanillodelportalámparas.
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
Conectar el alambre de
suministro negro o rojo al
Conectar el alambre de
suministro blanco al
Negro Blanco
*Cordon paralelo (redondo y liso)
*Cordon paralelo (cuadrado y estriado)
Claro, marrón, amarillio o negro
sin hebra identificadora
Claro, marrón, amarillio o negro
con hebra identificadora
Alambre aislado (diferente del verde)
con conductor de cobre
Alambre aislado (diferente del
verde) con conductor de plata
*Nota: Cuando se utiliza alambre paralelo
(SPT I y SPT II). El alambre neutro es de forma
cuadrada o estriada y el otro alambre será de
forma redonda o lisa. (Vea la ilustracíón).
Hilo Neutral
DateIssued:6/15/12 IS-43059-US
GREEN GROUND
SCREW
CUPPED
WASHER
A
B
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
(NOT PROVIDED)
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
ARANDELA
CONCAVA
A
B
TIERRA DE LA
CAJA DE SALIDA
TORNILLO DE TIERRA,
VERDE
DEPRESIONES
TIERRA
ARTEFACTO
CONECTOR DE ALAMBRE
(NO SE PROVEE)
TIERRA DE LA
CAJA DE SALIDA
TORNILLO DE TIERRA,
VERDE
TIERRA
ARTEFACTO
CANOPY
ESCUDETE
STEM
VÁSTAGO
HEXNUT
TUERCAHEXAGONAL
LOOP
ANILLO
CHAINLINK
ESLABÓNDE
CADENA
3
MOUNTINGSTRAP
PLANCHAPARAMONTAR
3
SEE OTHER SIDE FOR RIGID STEM MOUNT IN-
STALLATION.
VEA EL OTTRO LADO PARA LA INSTALACIÓN
DE MONTAJE RÍGIDO MADRE.
GLASS
VIDRIO
COUPLING
ACOPLAMIENTO
THUMBSCREW
TORNILLODE
MARIPOSA
SMALLRUBBERWASHER
PEQUEÑAARANDELADE
CAUCHO
FINIAL
CAPUCHON