Manualshelf

Installation Sheet

ManualsBrandsKichler ManualsIndoor Ceiling FixturesArmstrong 3 Light 15" Wide Semi -Flush Ceiling Fixture
12
Table Of Contents
Date Issued: 09/25/17 IS-43196-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starting and during the installation.
NOTE: This xture can be mounted to a ceiling or a wall outlet box.
1) Attach mounting strap[2] to outlet box[6] with strap mounting
screws[3]. Mounting strap can be adjusted to suit position of
xture.
2) Grounding instructions: (See Illus. A or B)
A) On xtures where mounting strap is provided with a hole
and two raise dimples. Wrap ground wire from outlet box
around green ground screw, and thread into hole.
B) On xtures where a cupped washer is provided. Put
ground wire from outlet box under cupped washer and
green ground screw and thread screw into hole in mount-
ing strap.
If xture is provided with ground wire. Connect xture ground
wire to outlet box ground wire with wire connector, after follow-
ing the above steps. Never connect ground wire to black or
white power supply wires.
3) Make wire connections using supplied wire nuts[5]. Reference
chart below for correct connections and wire accordingly.
4) Push xture[1] to wall or ceiling outlet box. Be sure not to pinch
wires between wall and canopy of xture.
5) Screw in two (2) mounting screws[4]: one on two sides of
canopy.
6) Insert recommended bulbs. Note that the arms can be rotated.
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
A
B
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
5
2
3
1
4
6

Summary of content (2 pages)