Installation Sheet

Date Issued: 05/31/16 IS-45495-CB
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main fuse
box before starting and during the installation.
INSTRUCTIONS
For Assembling and Installing Fixtures in Canada
Pour L’assemblage et L’installation Au Canada
1) Find the appropriate threaded holes on mounting strap. As-
semble mounting screws into threaded holes.
2) Attach mounting strap to outlet box using the (2) two
supplied mounting strap screws. Mounting strap can be
adjusted to suit position of fixture.
3) Make wire connections. Reference chart below for correct
connections and wire accordingly.
4) Push fixture to wall, carefully screw in the (4) fixture mount-
ing screws through holes in the sides of the canopy. NOTE,
the fixture can be mounted with the glass in the up or down
position.
5) Set glass down over socket.
6) Place spacer over socket.
7) Thread socket ring onto socket. (DO NOT over tighten.)
8) Insert recommended bulb (Not Included).
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
SOCKET RING
SPACER
GLASS
SOCKET
FIXTURE
MOUNTING SCREWS
STRAP MOUNTING SCREW(S)
MOUNTING STRAP
WITH GROUND SCREW
WIRE CONNECTOR(S)
OUTLET
BOX