Instructions / Assembly

ManualsBrandsKICHLER ManualsLightingAli 1-Light Brushed Natural Brass Hallway Wall Sconce with White Fabric Shade

For warranty information please visit: kichler.com/warranty

REV 8-MAR-2020

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

CAUTIONS

CAUTION – RISK OF SHOCK:

Disconnect Power at the main circuit breaker panel or main

fusebox before starting and during the installation.

WARNING:

1. This fixture is intended for installation in accordance

with the National Electrical Code (NEC) and all local

code specifications. If you are not familiar with code

requirements, installation by a certified electrician is

recommended. Failure to adhere to these codes and

instructions may result in serious injury and/or property

damage and will void the warranty.

CLEANING:

• Always be certain that electric current is turned o before

cleaning.

• Only a soft damp cloth should be used. Harsh cleaning

products may damage the finish.

INSTALLATION INSTRUCTIONS

FIXTURE DIAGRAM

IS-52505-US

PARTS LIST

[A] Mounting

Strap

[B] Outlet Box

[C] Strap

Mounting

Screw (2)

[D] Mounting

Screw (2)

[E] Canopy

[F] Knob (2)

[G] Lock Washer

(2)

[H] Shade

[I] Decorative

End

[J] Socket

1. Find the appropriate threaded holes on mounting strap[A] that align with

hole distance in canopy[E]. Thread mounting screws[D] into threaded

holes starting from outlet box[B] side.

2. Attach mounting strap[A] to outlet box[B] using the strap mounting

screws[C]. Mounting strap can be adjusted to suit position of fixture.

3. Grounding instructions: (See Illus. a or b).

a. On fixtures where mounting strap is provided with a hole and two

raised dimples, wrap ground wire from outlet box around green

ground screw, and thread into hole.

b. On fixtures where a cupped washer is provided, attach ground wire

from outlet box under cupped washer and green ground screw, and

thread into mounting strap.

If fixture is provided with ground wire, connect fixture ground wire to

outlet box ground wire with wire connector after following the above

steps. Never connect ground wire to black or white power supply wires.

4. Make wire connections. Reference chart below for correct connections

and wire accordingly.

Connect Black or Red

Supply Wire to:

Connect White Supply

Wire to:

Black White

*Parallel cord (round &

smooth)

*Parallel cord (square &

ridged)

Clear, Brown, Gold or Black

without Tracer

Clear, Brown, Gold or Black

with Tracer

Insulated wire (other

than green) with copper

conductor

Insulated wire (other

than green) with silver

conductor

*Note: When parallel wire (SPT

1 & SPT 2) are used. The neutral

wire is square shaped or ridged

and the other wire will be round

in shape or smooth (See illus.) Neutral Wire

5. Push fixture to wall, carefully aligning the mounting screws protruding

from the mounting strap with holes in canopy.

NOTE: Fixture should be mounted with shade[H] in the up position as

shown. Make sure all wires are inside canopy[E] and do not get pinched

between mounting strap and canopy or wall and canopy of fixture.

6. Slip lock washers[G] over threads protruding through holes in canopy (2

places).

7. Screw knobs[F] onto threads protruding through holes in canopy (2

places) and tighten to secure fixture to wall.

8. Carefully slip shade[H] over socket[J] and seat on socket base.

9. Thread decorative end[I] into coupling on the bottom of fixture as shown.

Tighten to secure.

10. Insert recommended bulb (not included).

GREEN GROUND

SCREW

CUPPED

WASHER

OUTLET BOX

GROUND

FIXTURE

GROUND

DIMPLES

WIRE CONNECTOR

OUTLET BOX

GROUND

GREEN GROUND

SCREW

FIXTURE

GROUND

Summary of content (3 pages)

PAGE 1
We’re here to help 866-558-5706 Hrs: M-F 9am to 5pm EST INSTALLATION INSTRUCTIONS FIXTURE DIAGRAM H J Find the appropriate threaded holes on mounting strap[A] that align with hole distance in canopy[E]. Thread mounting screws[D] into threaded holes starting from outlet box[B] side. 2. Attach mounting strap[A] to outlet box[B] using the strap mounting screws[C]. Mounting strap can be adjusted to suit position of fixture. 3. Grounding instructions: (See Illus. a or b). a.
PAGE 2
INSTRUCTIONS: For Assembling and Installing Fixtures in Canada Pour L’assemblage et L’installation Au Canada H E F 1. Trouvez les trous filetés appropriés sur l’étrier de montage[A] qui sont alignés sur la distance entre les trous du cache[E]. Vissez les vis de montage[D] dans les trous filetés en commençant par le côté du boîtie à prises[B]. 2. Fixer l’étrier de montage[A] sur la boîte à prises[B] à l’aide des vis de fixation de l’étrier[C].
PAGE 3
Estamos aquí para ayudarle 866-558-5706 Horario: Lunes-Viernes 9am a 5pm EST (hora oficial del este) INSTRUCCIONES DE INSTALACIÓN DIAGRAMA DE ACCESORIOS H J E F 1. Encuentre los orificios roscados apropiados en la abrazadera de montaje[A] que se alinean con la distancia de los orificios en el cubierta[E]. Atornille los tornillos de montaje[D] en los orificios roscados comenzando por el lado de la caja de salida[B]. 2.