Specification Sheet

ManualsBrandsKICHLER ManualsCabinet LightsIndependence 6 TD 40-Watt Textured Black Dimmable Power Supply

KichlerPro.com

Direct Wire Dimmable Power Supply

Nominal Input

Voltage

Max Output

Power

Output

Voltage

Output

load Min

120 Vac

40W

10W

12, 24V CV

24V CV

30%

Output

Current Max

Efficiency

Max Ambient

Temperature

THD

3.3 A (12V, 40W)

0.42 A (24V, 10W)

1.7 A (24V, 40W)

> 85%

typical

50º C (10W)

45º C (40W)

<30%

Power Factor

Dimming

Range

Startup Time

>0.9

10-100% of

light output

< 500 ms (40W)

<1000 (10W)

CV: Constant Voltage

12V & 24V 40W and 24V 10W Constant Voltage LED Drivers 4TD12V40BKT, 6TD24V40BKT, 6TD24V10BKT

White: Neutral

Black: Line

Red: + LEDs

Blue: - LEDs

Wiring Diagram

40W & 10W Power Supply with wiring compartments.

No additional NEMA enclosure required.

YEAR

WARRANTY

Ground (GRN)

12 or 24 VDC

LED Array/Fixture

Direct Wire Power Supply

V+ (Red)

V- (Blue)

120 VAC

~ 60Hz

L (BLK)

N (WHT)

Typical Application Diagram

Direct

Wire

Power

Supply

FEATURES & BENEFITS

• Economical choice for smaller or remote low-voltage

systems projects like illuminating a kitchen island, china

cabinet, or shelving.

• CL and ELV dimmer compatible

• Visit Kichler.com/dimming for complete list

• Includes Wiring Compartments — no additional NEMA

enclosure required.

APPLICATIONS

• Tape light

• Hard Strip lights (24V)

• Accent Disc lights

Summary of content (8 pages)

PAGE 1
Direct Wire Dimmable Power Supply 12V & 24V 40W and 24V 10W Constant Voltage LED Drivers 4TD12V40BKT, 6TD24V40BKT, 6TD24V10BKT Typical Application Diagram Direct Wire Power Supply 120 VAC ~ 60Hz LED Array/Fixture V+ (Red) V- (Blue) L (BLK) N (WHT) 12 or 24 VDC Ground (GRN) Wiring Diagram 40W & 10W Power Supply with wiring compartments. No additional NEMA enclosure required.
PAGE 2
Direct Wire Dimmable Power Supply 1 - ORDERING INFORMATION Part Number Nominal AC Line Voltage (VAC) Pout Max (W) Pout Min (W)* Vout Max (V) Iout Max (V) Vout Regulation 4TD12V40BKT 120 40 12 12 3.3 11.64 - 12.36 (+/- 0.9V) 6TD24V10BKT 120 10 3 24 0.42 23.26 - 24.74 (+/- 1.8V) 6TD24V40BKT 120 40 12 24 1.7 23.26 - 24.74 (+/- 0.74V) * Load must exceed Pout Min for proper operation. Pout Min is a typical value and may vary from unit to unit.
PAGE 3
Direct Wire Dimmable Power Supply 3 - OUPUT SPECIFICATION (at 25ºC AMBIENT TEMPERATURE) Units Minimum Typical Maximum Notes Output Voltage (Vout) Vdc - 12, 24 - - Output Current (Iout) A 0 - 3.3 A 0.42 A 1.7 A Output Voltage Regulation % - +/- 3.
PAGE 4
Direct Wire Dimmable Power Supply 5 - EMC COMPLIANCE AND SAFETY APPROVALS EMC Compliance Conducted and Radiated EMI FCC CFR Title 47 Part 15 Class B at 120 Vac Harmonic Current Emissions IEC61000-3-2 - Voltage Fluctuations & Flicker IEC61000-3-3 - Immunity Compliance Transient Protection ESD (Electrostatic Discharge) IEC61000-4-2 6kV contact discharge, 8kV air discharge, level 3 RF Electromagnetic Field Susceptibility IEC61000-4-3 3V/m, 80 - 1000 MHz, 80% modulated at a distance of 3 meters
PAGE 5
Direct Wire Dimmable Power Supply 7 -INSTALLATION Figure 3 Enclosure Lid Enclosure with knockouts 8 - DIMMING For recommended dimmers, visit Kichler.com/dimming. KichlerPro.
PAGE 6
Direct Wire Dimmable Power Supply 9 - VOLTAGE DROP CHARTS For best performance and lumen output, ensure proper wire gauge is installed to compensate for voltage drop of low voltage circuits. 12V VOLTAGE DROP CHART 5W 0.42A 10W 0.83A 20W 1.67A 30W 2.5A 40W 3.33A 50W 4.17A 60W 5A 18 AWG 65 ft. 32 ft. 16 ft. 10 ft. 8 ft. 6 ft. 5 ft. 16 AWG 100 ft. 50 ft. 25 ft. 16 ft. 12 ft. 10 ft. 8 ft. 14 AWG 160 ft. 79 ft. 39 ft. 26 ft. 20 ft. 16 ft. 13 ft. 12 AWG 240 ft. 120 ft. 59 ft.
PAGE 7
Direct Wire Dimmable Power Supply 10 - MECHANICAL DETAILS Packaging: Metal case for all variations. I/O Connections: Flying leads, 18 AWG on both AC and DC connections, insulation rated minimum 90°C, 300V, stripped and tinned. There is a ground wire attached to the metal enclosure. 11 - OUTLINE DRAWINGS Figure 7 2.6" 8.7" 1.4" 12 - LABELING The 6TD24V40BKT is used in Figure 8 as an example to illustrate a typical label. Figure 8 KichlerPro.
PAGE 8
Direct Wire Dimmable Power Supply 13 - SAFETY WARNINGS / DISCLOSURES 1. Install in accordance with national and local electrical code regulations. 2. This product is intended to be installed and serviced by a qualified, licensed electrician. 3. NEC code 725. 136: Class 1 and Class 2 curcuits in same enclosure must be separated by a barrier unless Class 2 circuit conductors are installed in accordance with 725.41 Class 1 circuits.