Installation Guide

ASSEMBLY INSTRUCTIONS
4
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time: 30 minutes to 1 hour
Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers,
electrical tape, ladder, safety glasses.
1. The hanging length of the cable (B) for this
fixture is adjustable. Hold the fixture canopy
(A) up against the ceiling to determine the
desired length before the entire fixture is
assembled.
The cable (B) is held in place by a
compression fitting (C). Push up, and hold,
the fitting’s spring loaded tube (C) to release
the cable (B) for adjustment.
A
B
C
C
B
B
C
1
1b1a