Installation Guide

4
ASSEMBLY INSTRUCTIONS
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time: 30 minutes to 1 hour
Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers,
electrical tape, ladder, safety glasses.
Note: Before drilling the anchor holes be sure
that the holes on the mounting bracket match up
with the holes on the outlet box.
4
Short Machine
Screw
x 2
BB
Hardware Used
2
B
BB
Outlet Box
Arm
2. Orient the mounting bracket (B) so that the arms
are facing away from the outlet box (not
included). Connect the mounting bracket (B) to
the outlet box with short machine screws (BB).
Hardware Used
1. Temporarily raise mounting bracket (B) to wall.
Mark location for anchor (DD). Use 9/32 size drill
to drill holes for anchor (DD). Insert anchor (DD)
into hole.
x 2Anchor
DD
Hardware Used
3. Screw anchor screws (EE) through mounting
bracket (B) and into anchors (DD).
x 2
EE
Anchor
Screws
3
DD
EE
B
1
Wall
DD
B