Specification Sheet
Direct-to-Ceiling LED Downlight – Recessed
© 2020 Kichler Lighting LLC. All Rights Reserved. | LS19014
SPECIFICATIONS
ELECTRICAL
Input Voltage 120Vac
Input Voltage Range 108Vac-132Vac
Input Frequency 60Hz
Power See Data Table
Power Factor >0.9
Surge 2.5kV ringwave
Connector Push-in quick connects AC; Screwlock DC terminal
PHOTOMETRICS
Light Source LED Backlit
Color Temperature(s) 2700K/3000K
Color Rendering Index (CRI) >90, R9>50
Dimmable Yes
Lumen Packages See Data Table
Lumens Per Watt (LPW) >60LPW
RATINGS & CERTIFICATIONS
Safety Rating Wet
Installation Requirements Wet Indoor Covered Ceiling; Damp Outdoor Covered Ceiling
(Not for coastal environments)
Operating Ambient Temperature 0-40°C
Lumen Maintenance L70 at 50,000 Hrs
Safety Certification cETLus
Energy Star Yes
T24 Yes
FCC CFR 47, FCC Part 15, Subpart B:2017
MECHANICAL
Dimensions See Dimension Table
IP Rating IP-54
MOUNTING
Direct to ceiling via spring clips
OPTICS
Backlit
WARRANT Y
5 Year
ACCESSORIES
See Accessories
OVERVIEW
With its simple snap-in installation, the Direct-to-Ceiling (DtC)
Recessed LED Downlight allows for installation in drywall and drop
ceilings without the need for a junction box. This downlight is designed
with a baffled trim that reduces glare and delivers general room lighting.
FEATURES
• Baffle design minimizes glare and provides a welcoming illumination to
any room.
• Simple snap-in installation is fast and easy.
• Remote driver enables installation in drywall and drop ceilings without
junction box.
• Dimmable, see recommended dimmers at Kichler.com
• 5-year warranty
• Available in two color temperatures (2700K & 3000K) to coordinate with
the look and feel of the room.
PROJECT: PRODUCT #:
TYPE: DATE:
PREPARED BY: AUTHORIZED BY*:
COMMENTS:
* A Kichler Lighting representative
can assist with a proposed Spec