Owner's Manual

lfKICKER®
Solo-BaricLSSubwoofer
Owner'sManual
Models:
S1SL5 /
S12L5 / S10L5 / SBL5
Congratulations on your
KICKER purchase
Please record your purchase
information and keep your sales
receipt for validation of warranty.
Authorized Kicker Dealer:
Purchase Date:
Subwoofer Model Number:
Subwoofer Serial Number:
Wiring Options
Solo-Baric subwoofers are available with dual 20 (ohm) or dual 40 voice coils. Both coils must be
connected to a source of amplification. The dual
20 woofer will generate a 10 load if the coils are
wired
in parallel or a 40 load in series. The dual 40 woofer will provide a 20 load wired in parallel or
SO load wired in series. The terminals with the white dots are for the first voice coil. The terminals with
solid-red and solid-black markings are for the second voice coil. See Figures 1 and
2.
ParallelWiring
Dual 20 Voice Coils = 10 Load
Dual
40 Voice Coils = 20 Load
Amplifier +
Speaker
Connection
Amplifier -
Speaker
Connection
2 or 4
S15L5
24.0
1500
(750)
.428
7.92 (224.36)
155/8 (39.7)
85/8 (21.9)
2 or 4
S12L5
31.8
1200
(600)
.472
2.71 (76.74)
125/8 (32)
613/16 (17.3)
Coil 1 +
Coil 2 +
SeriesWiring
Dual 20 Voice Coils = 40 Load
Dual
40 Voice Coils = SO Load
2 or 4
33.3
900
(450)
.403
1.53 (43.34)
1011/16 (27.1)
63/16 (15.7)
S10L5
Coil 1 -
Figure 2
Amplifier +
Speaker
Connection
Amplifier -
Speaker
Connection
2 or 4
46.3
600
(300)
.620
.446 (12.64)
8 13/16 (22.4)
43/4 (12.1)
S8L5
Coil 1 +
Coil 2 +
Performance
Coil 1 -
Model:
Nominal Impedance [Zn], ohm [per coil]
Resonance Frequency [fs], Hz
Power Handling Watts, Peak (RMS)
Total'O-Factor rOts]
Equivalent Volume [Vas], ft3 (L)
Outer Frame Dimension, in (cm)
Mounting Depth, in (cm)
Figure 1
Measurements based on the 2 ohm dual voice coil models.
2
SOLO-BARICL5SUBWOOFER