Owner's Manual
Table Of Contents
SPECIFICATIONS
Model
S8C
S10C
S12C S15C
Equivalent Volume
[Vas].
ft3
(L)
46(1314)
1.7 (48.20) 3.31 (93.8)
10.1
(285.95)
Net Displacement,
in
3
(cc) 46.15 (7563)
8243
(1350.8)
9744
(1596.8)
15345
(2514.6)
Outer Frame Dimension,
in
(em)
81/2
(21.5)
105/8
(27)
121/2
(31.7)
151/2
(394)
Mounting Depth,
in
(em)
45/16(11)
53/4
(14.6)
65/16
(16)
77/8
(20)
Hole Cut-Out Diameter
71/16
(17.9)
91/4
(23.5)
11
1/8 (28.3)
137/8
(35.2)
SEALED
ENCLOSURE
APPLICATIONS
The Solo Classic is designed to be
used
solely with smaller, sealed enclosures and will generate more
sound pressure than any competing subwoofer on the market. The outlined sealed enclosure designs
give the smoothest response with increased energy at the lowest frequencies,
20
to 30Hz. These designs
deliver large amounts of highly-accurate bass and can be dnven
With
punishing levels of amplifier power.
All
the
cubic
feet
(L)
measurements
in
this manual include the displacement of the woofer. Do not make
the airspace greater than the recommended enclosure volume, as damage may occur.
If
you prefer an
ultra-smooth bass response, you should loosely
fill
your Solo Classic enclosure with poly-fil stuffing. The
use of poly-fil will slightly decrease efficiency, but will deepen and extend the low frequency output.
Use
3/4"
(1.9cm) or thicker MDF (medium density fiberboard) and seal the joints
with silicone Use the "template" inside your Solo Classic's shipping carton
to mark the mounting hole, then
cut
directly on the line. These designs need
internal bracing.
Add
triangular bracing between each of the larger unsupported
panels, making certain to
account
for
the
added volume displacement. See
Figure 3.
For more advice on box building, refer
to
your Authorized Kicker Dealer, or click on the Support tab on
the Kicker homepage,
www.kicker.com. Please e-mail support@kicker.com or call Technical Support at
(405)
624-8583
for specific or unanswered questions.
Panel Dimensions for Sealed Enclosures using
3/4"
(1.9cm) thick MDF (See Figure
4)
Model Volume
ft3
(L)
Panel A
in.
(cm) Panel
Bin.
(cm) Panel C
in.
(cm)
S8C
.33
ft3
(9.
34L)
1
Ox1
0 (25Ax25A) 10x8 (25Ax20.3) 8x8.5 (20.3x21.6)
S10C .66
ft3
(18. 69L)
12x12
(30.5x30.5)
12x1
0.5
(30.5x26.7) 10.5x1
0.5
(26.7x26.
7)
S12C .88
ft3
(24. 92L)
13x13
(33x33)
13x11.5
(33x29.2) 11.5x11 .5 (29.2x29.2)
S15C
1.25
ft3
(35AL)
16x16
(40
6x40
6)
16xlO.25
(40.6x26)
10.25x10.25
(26x26)
P.O
Box
459·
Stillwater, Oklahoma
74076·
USA·
(405)
624-8510
NOTE:
All
specincations and performance fi9ures are subject
to
change.
Please visit
www.kicker.com for the most current information.
To
get the
best performance from your new
KICKER
Subwoofer. we recommend using
genuine
KICKER
Accessories and Wiring. Please allow two weeks of break-in
time for the subwoofer to reach optimum performance.
3
5)
stillwaterdesigns
«(