Owner's Manual

Mounting Instructions

When selecting a location to mount your Kicker KQ30 equalizer be sure it is

structurally sound and that there are no items behind the area that could be

damaged by the screws. Check for wiring, brake lines, fuel lines, gas tanks, etc.

Remember that the controls on top of the equalizer will need to be accessible

for adjustment later. Keep this in mind as you choose your equalizer’s mounting

location.

Now that you are ready to mount your equalizer, use the KQ30 chassis as a

template and mark the four mounting hole locations with a marking pen. Use a

7/64” drill bit to pre-drill the four holes and then use the supplied screws to

securely mount the equalizer.