Owner's Manual

6
KS Component Speakers
+
-
+
-
+
-
INPUT
MID
TWEETER
COAXIAL MOUNTING
The KS-Series Component system can also be mounted coaxially by attaching the tweeter to the center
of the midrange. For coaxial mounting, unscrew and remove the phase plug from the center of the KS
midrange driver. Next, run the tweeter wires through the mounting post into the center of the midrange
driver and out of the back plate hole. Connect the tweeter assembly to the mounting post and screw the
mounting post into the center of the midrange driver. After the tweeter has been secured to the midrange,
route the wiring through the wire groove on the back plate of the midrange and attach the tweeter wires to
the wire tab with the included cable tie. See below.
tweeter (mount second)
phase plug
coaxial mounting adapter (mount fi rst)
KS Crossover
wire tab
tweeter wires
speaker wires
2011 KS Components Multilingual Rev F.indd 62011 KS Components Multilingual Rev F.indd 6 4/3/2013 2:31:35 PM4/3/2013 2:31:35 PM