Owner's Manual

2
SUBSTATION™
POWERED ENCLOSURE
Owner’s Manual
INSTALLATION
Mounting: Choose a structurally sound location to mount your KICKER powered subwoofer enclosure. Carefully
check the areas where the mounting straps will be placed. Make sure the mounting screws will not puncture
the gas tank/brake lines/wiring or interfere with any mechanical parts on the underside of the mounting surface.
Choose a location that allows at least 4” (10cm) of open ventilation for the amplifi er. If possible, mount the
enclosure in the climate-controlled passenger compartment.
Vented Enclosures: Do not obstruct the vent opening, and make sure you leave at least 4” [10cm] of space
around the vent. When mounting the enclosure in the extreme rear of the vehicle, point the woofer toward the
front of the vehicle for optimal bass. Conversely, if the enclosure is going to be mounted closer to the back
seat, pointing the woofer toward the rear of the vehicle will give you the best results. If it is more convenient to
mount the enclosure along a side wall, put the enclosure on the left side of the vehicle; this orientation will make
the vent point toward the rear of the vehicle for optimal bass output.
PERFORMANCE
Authorized KICKER Dealer:
Purchase Date:
Model Number:
Serial Number:
Model: PES10C PECVR12
Subwoofer 10” [25cm] Solo Classic 12” [30cm] CompVR
RMS Power @ 14.4V 450W 400W
Frequency Response ± 1dB 25–200Hz 25–200Hz
Signal-to-Noise Ratio >95dB >95dB
Crossover 50–200Hz 50–200Hz
Phase Switch 0° / 180° 0° / 180°
Input Sensitivity low level: 125mV–5V
high level: 250mV–10V
low level: 125mV–5V
high level: 250mV–10V
KickEQ Bass Boost variable to +18dB@40Hz variable to +18dB@40Hz
Remote Bass included included
Enclosure Type sealed vented
Net Weight 35lbs. [16kg] 38lbs. [17kg]
Height 13-1/4” [337mm] 16” [406mm]
Width 18” [457mm] 17-1/16” [433mm]
Depth at base 8-1/4” [210mm] 14-1/2” [368mm]
Depth at top 5” [127mm] 11-1/4” [286mm]
MODEL: PES10C / PECVR12
The space-saving KICKER SubStation™ Powered Enclosures offer the quickest and easiest way to add a
subwoofer to your vehicle. These systems have been meticulously fi ne-tuned by KICKER engineers to deliver
astounding performance and sound without the time-consuming setup required for a typical amp-sub upgrade.
2011 PES10C - PECVR12 RevE.indd 22011 PES10C - PECVR12 RevE.indd 2 9/14/2010 1:55:49 PM9/14/2010 1:55:49 PM