Owner's Manual

KXM.2-SERIES AMPLIFIERS

OWNER’S MANUAL

INSTALLATION

Mounting: Choose a dry, structurally sound location to mount your KICKER ampliﬁ er. Make sure there are no

items behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open

ventilation for the ampliﬁ er. Drill four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the

ampliﬁ er.

PERFORMANCE

Authorized KICKER Dealer:

Purchase Date:

Serial Number:

Model: KXM400.2

RMS Power

@ 14.4V, 4 stereo,  1% THD+N

@ 14.4V, 2 stereo,  1% THD+N

@ 14.4V, 4 mono,  1% THD+N

100W x 2

200W x 2

400W x 1

Length | in [cm] 9 9/16 [24.4]

Height | in [cm] 2 3/16 [5.5]

Width | in [cm] 8 5/16 [21]

Frequency Response ± 1dB 10Hz–20kHz

Signal-to-noise Ratio >95dB, AU-weighted, @ rated power

Input Sensitivity Low Level: 125mV–5V

High Level: 250mV–10V

Electronic Crossover Off

Variable HP, 10-500Hz

Variable LP, 40-500Hz; 400Hz–5,000Hz with 10X Switch (BP capable)

Slope: 24dB/octave

Bass Boost 0-18dB @ 40Hz

Pro Tip: To get the best performance from your new KICKER Ampliﬁ er and extend the warranty by 1 year, use

genuine KICKER accessories and wiring.

MODEL: KXM400.2

2013 KXM Stereo Amp Rev G.indd 22013 KXM Stereo Amp Rev G.indd 2 2/19/2013 3:03:19 PM2/19/2013 3:03:19 PM