{fKICKER MODEL: KMT67 Long-Range Tower System Owner's Manual KMT67 Authorized KICKER Dealer: Purchase Date: Serial Number: The KICKER KMT67 Long-Range Tower System is specifically designed for mounting in the open-air, using an exponential-hom-loaded 20mm titanium tweeter and dual 6.75 inch (165mm) woofers to produce clean and crisp sound over a long distance. The injection-molded ABS enclosure and speakers are UV treated, splash resistant, and weather resilient.
plastic mounting inserts stainless steel sockethead cap screws (1 /4" Allen wrench) / supported diameters: 1 .625" [42 .3mm] 1. 75" [44.4mm] 1.875 [47.6mm] 2" [50 .8mm] 2.25" [57.2mm) 2.375" [60.3mm) 2.5" [63.5mm] ® place and screw the mounting bracket bottom to the top of the KMT67 enclosure place mounting inserts mounting bracket bottom stainless steel sockethead cap screws (1 /4" Allen wrench) ~,· ..
Wiring: If pre-existing speaker wiring is not available in your desired mounting location, it may be necessary to run the wire through the wakeboarding tower or roll bar on your vehicle. The speaker wire should be kept away from sharp edges to avoid the possibility of getting pinched by moving mechanisms and be out of the way of all passengers and party-goers. If you must drill a hole to run the speaker wire through any location, be careful not to drill into other wiring or existing mechanisms.
Acoustics Limited Warranty When purchased from an Authorized KICKER Dealer, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEAR from date of original purchase. If this product is identified as "Refurbished" or "B Goods", the warranty is limited to a period of THREE (3) MONTHS from date of original purchase. In all cases you must have the original receipt.
