Owner's Manual

{fKICKER
MODEL:
Authorized
KICKER
Dealer:
Purchase Date:
Serial
Number:
KMT67
Long-Range Tower
System
Owner's
Manual
KMT67
The
KICKER
KMT67 Long-Range Tower System
is
specifically
designed for mounting
in
the open-air, using an
exponential-hom-loaded 20mm
titanium tweeter and
dual
6.75
inch (165mm) woofers to produce clean and
crisp sound over a
long
distance. The injection-molded ABS
enclosure
and speakers are UV treated,
splash
resistant, and weather
resilient.
The woofers
utilize
a
sealed
cone and motor
assembly,
and
an
open-cell
foam
protects the tweeter. Mount the KMT67
in
your boat or get creative with a pair of them
in
the garage, on your 4x4
or side-by-side
roll
bars, or
in
any other bar-mounted
application.
INSTALLATION
Mounting:
The sound produced by the KMT67 long-range tower system is directional. The
enclosure
may
be mounted
vertically
or
horizontally;
the
billet -aluminum
mounting brackets can accommodate any
angle
for
the optimum firing direction. Find the best
location
for stereophonic sound and,
if
necessary, add more KMT67
systems to the
installation
to
help
distribute and
balance
the sound. After determining the best mounting
locations, carefully
check the areas where the mounting hardware and speaker cable
will
be placed. The KMT67
long-range
tower system's billet -aluminum
mounting brackets use seven sets of ABS plastic
inserts to
fit
most
wakeboarding tower and
roll
bar diameters.
The mounting hardware design provides versatility
in
angular
positioning to direct the speaker's output to the
ideal listening position; however,
it
is
not recommended to reposition the speakers excessively after they are
mounted. Custom mounting
locations will
require more preparation, work, and
possibly
customized hardware.
If
the mounting
location
requires you to cut
metal,
avoid structural
metal
and braces.
In
either case, make sure the
speaker
will
not interfere with the
vehicle's
mechanisms or the party you are throwing out on your pontoon boat.
2