Q-CLASS CWQ10 I CWQ1_2 I CWQ15 Owner's Manual I English Manual del Propietario I Espanol CompO ALTAVOZ PARA SONIDOS GRAVES Benutzerhandbuch I Deutsch Compo TIEFTONER Manuel d'utilisation I Franc;aise Compo HAUT-PARLEUR D'EXTREMES GRAVES C LASS
Variable Cross-Section Elastomeric Surrounds (Increased Excursion} Stitched Surround & Cone for Maximum Bond Strength Mounting Hardware Covers for a Clean, Finished Installation Material envolvente elastomerico transversal variable (mayor variaci6n} Material envolvente y de cono con costura para una maxima resistencia de la union Cubiertas de hardware de montaje para una instalaci6n prolija y con acabado Bastomerische Einfassung mit variablem Querschnitt (Erweiterte Auslenkung) Starke Nahte an Einfas
{fKICKER Models: ACJthorized KICKER Dealer: Purchase Date: Speaker Model Number: Speaker Serial Number: COMPQ SUBWOOFER OWNER'S MANUAL CompQ10 I CompQ12 I CompQ15 Note: All specifications and performance figures are subject to change. Please visit www.kicker.com for the most current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine KICKER Accessories and Wiring . Please allow two weeks of break-in time for the subwoofer to reach optimum performance.
SEALED ENCLOSURE APPLICATIONS These sealed enclosure designs give the smoothest response with increased energy at the lowest frequencies, 20Hz-30Hz. These designs deliver massive amounts of highly-accurate bass and can be driven with punishing levels of amplifler power. The high performance suspension system can operate in a larger sealed enclosure.
VENTED ENCLOSURE APPLICATIONS These boxes are the enclosure of choice for outrageous bass, so if space is not a problem and you want to get the most from your CompQ, try one of these vented designs. CompQ subwoofers will handle massive amounts of power in any of the recommended enclosures, minimum or maximum. The smaller enclosures are best for use in limited-space applications.
Figure 2 All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the vented enclosures the displacement of the port must be calculated and added to the internal volume of the final design. Use the outer dimensions of the vent and multiply "Xx Y x Z" , and convert to cubic feet, for example the CWQ12 Vented Minimum design's external vent dimensions are, using 3/4" (1.9cm) MDF: [ (13.25" + 1:5" total MDF wall thickness) x (2.5" + 1.5" total MDF wall thickness) x 22.
Q-CLASS ACOUSTICS LIMITED WARRANTY VVhen purchased from an Authorized KICKER Dealer, KICKER warrants O-Class KICKER products to be free from defects in material and worl
International Warranty Contact your International Kicker dealer or distributor concerning specific procedures for your country's warranty policies. Our goods cane with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for canpensation for any other reasonably foreseeable loss or damage.
