Owner's Manual

ManualsBrandsKicker ManualsAll component subwoofers43C104

Comp

Subwoofer

Comp10 Comp12 Comp15

Zn | Ω 4 4 4

[Fs] | Hz 33 30 23

[SPLo], dB @ 1W, 1m 86.2 88.3 90.3

[Qts] .585 .559 .404

[Qms] 9.157 10.22 9.607

[Qes] .625 .591 .422

[Re] | Ω 3.78 3.65 3.32

[Vas] | ft

[L] 1.65, 46.94 3.36, 95.18 7.99, 226.14

Xmax [mm] 10.3 10.3 13.5

Comp10 Comp12 Comp15

Continuous Power Handling [Watts RMS] 150 150 250

Peak Power Handling [Watts] 300 300 500

Outer Frame Dimension [in, cm] 10-11/16, 27 12-5/8, 32 15-1/2, 39.3

Mounting Depth [in, cm] 5-1/16, 12.8 5-7/8, 14.8 7-7/16, 18.9

Mounting Cutout [in, cm] 9-1/8, 23.1 11, 27.9 13-11/16, 34.7

Comp10 Comp12 Comp15

Continuo Manejo de potencia [Watts RMS] 150 150 250

Manejo de potencia máxima [Watts] 300 300 500

Dimensión externa Marco [plg., cm] 10-11/16, 27 12-5/8, 32 15-1/2, 39.3

Montaje Profundidad [plg., cm] 5-1/16, 12.8 5-7/8, 14.8 7-7/16, 18.9

Montaje de recorte [plg., cm] 9-1/8, 23.1 11, 27.9 13-11/16, 34.7

Comp10 Comp12 Comp15

Dauerbelastbarkeit [Watts RMS] 150 150 250

Impulsbelastbarkeit [Watts] 300 300 500

Außenrahmen Dimension [zoll, cm] 10-11/16, 27 12-5/8, 32 15-1/2, 39.3

Einbautiefe [zoll, cm] 5-1/16, 12.8 5-7/8, 14.8 7-7/16, 18.9

Montageausschnitt [zoll, cm] 9-1/8, 23.1 11, 27.9 13-11/16, 34.7

Comp10 Comp12 Comp15

Continue Puissance admissible [Watts RMS] 150 150 250

Puissance admissible de pointe [Watts] 300 300 500

Dimension de cadre extérieur [po, cm] 10-11/16, 27 12-5/8, 32 15-1/2, 39.3

Profondeur de montage [po, cm] 5-1/16, 12.8 5-7/8, 14.8 7-7/16, 18.9

Montage Découpe [po, cm] 9-1/8, 23.1 11, 27.9 13-11/16, 34.7

16Comp+F-20161122

43C152/43C154/43C122/43C124/43C102/43C104

stillwaterdesigns

P.O. Box 459

Stillwater, Oklahoma 74076

USA • (405) 624–8510

(fKICKER

Summary of content (4 pages)

PAGE 1
(fKICKER Comp® Subwoofer Comp10 Comp12 Comp15 Zn | Ω 4 4 4 [Fs] | Hz 33 30 23 [SPLo], dB @ 1W, 1m 86.2 88.3 90.3 [Qts] .585 .559 .404 [Qms] 9.157 10.22 9.607 [Qes] .625 .591 .422 [Re] | Ω 3.78 3.65 3.32 [Vas] | ft3 [L] 1.65, 46.94 3.36, 95.18 7.99, 226.14 Xmax [mm] 10.3 10.3 13.5 Comp10 Comp12 Comp15 Continuous Power Handling [Watts RMS] 150 150 250 Peak Power Handling [Watts] 300 300 500 Outer Frame Dimension [in, cm] 10-11/16, 27 12-5/8, 32 15-1/2, 39.
PAGE 2
Sealed Enclosures | Caja Sellados | Geschlossenen Gehäusen | Enceintes Closes Minimum Sealed Mínimo Sellado Maximum Sealed Máxima de Sellado Volume ft3 [L] and Power Handling Volumen, pies3 [L] y Procesamiento de potencia Volume ft3 [L] and Power Handling Volumen, pies3 [L] y Procesamiento de potencia Minimale Sealed Minimum Étanches Volumen L und Belastbarkeit Volume pied au cube [L] et Puissance admissible Maximale Sealed Maximum Étanches Volumen L und Belastbarkeit Volume pied au cube [L]
PAGE 3
Vented Enclosures | Caja Ventilados | Bassreﬂex-Gehäuse | Enceintes Aérées Vented Minimum Comp10 Comp12 Comp15 Box Volume, ft [L] 1.25 [35.4] 1.75 [49.6] 3 [85] Port Opening, in. x in. [cm x cm] 1.5 x 10.5 [3.8 x 26.7] 2 x 12.5 [5.1 x 31.8] 2.5 x 15.5 [7 x 39.4] Port Length, in. [cm] 14.5 [36.8] 16 [40.6] 17 [43.2] Power Handling, RMS 150 150 250 Vented Maximum Comp10 Comp12 Comp15 Box Volume, ft [L] 1.75 [49.6] 2.25 [63.7] 4 [113.3] Port Opening, in. x in. [cm x cm] 1.5 x 10.
PAGE 4
Vented Enclosures | Caja Ventilados | Bassreﬂex-Gehäuse | Enceintes Aérées For the vented enclosures the displacement of the port must be calculated and added to the internal volume of the ﬁnal design. Use the outer dimensions of the port and multiply “X x Y x Z”, then convert to cubic feet. For example, the Comp12 Vented Minimum design’s external port dimensions are, using 3/4” (1.9cm) MDF: (12.5” + 1.5” total MDF wall thickness) x (2” + 1.5” total MDF wall thickness) x (16”) x (1 ft3 / 1728 in3 ) = .