Owner's Manual

Do not
install
a port opening against a
solid surtace,
such
as
an
internal
brace,
back-panel
or trunk
wall,
seat or interior panel
of your vehicle.
The port opening must remain unobstructed. Use the smallest
dimension of the
rectangular
port as the minimum amount of space between the port opening and any
solid surtace
to insure unrestricted
airtlow.
If
you prefer
an
ultra-smooth
bass response, you
should loosely
fill
your
L7
enclosure
with
poly-fil
stuffing. Ported designs
will
require covering the end of the port
(located inside the box) with grill cloth,
chicken wire, or expanded
metal
to prevent the
poly-fil
from exiting the port. The use of
poly-fil will slightly
decrease efficiency, but will
deepen and extend the
low
frequency output.
For more advice on box
building,
refer to your Authorized Kicker
Dealer,
or
click on the Support tab on
the Kicker homepage,
www.kicker.com.
Please e-mail [e-mail] or
call Technical Support at
(405)
624-8583
for specific or unanswered questions.
Figure 3
D
=
3" x
3" for L7S12,
L7S15
D
=
2"
x
2"
for
L7S8,
L7S1
0
SEALED
ENCLOSURE
APPLICATIONS
Sealed
Minimum
Model Volume
ft
3
(L)
Power Handling
L7S8
.5 (14.16)
450W
RMS
L7S10
1 (28.32)
600W
RMS
L7S12
1.25 (35.4)
750W RMS
L7S15
2 (56.64)
1000W
RMS
---r-
------
...
1/
y
A'
J....._
, v
~------
------
--x-------------~
----
Sealed
Maximum
Model Volume fP
(L)
Power Handling
L7S8
.75
(21
.24)
450W
RMS
L7S10
1.25 (35.4)
600WRMS
L7S12
2 (56.64)
750W
RMS
L7S15
6 (169.9)
1000W
RMS
Panel
Dimensions for Minimum
Sealed Enclosures
using
3/
4"
(1
. 9cm) thick MDF
(See
Figure
5)
Model Volume
ft
3
(L)
Panel
A
in.
(em)
Panel 8
in.
(em)
Panel C
in.
(em)
L7S8
.5 (14.16)
11X11 (27.9X27.9)
11
x9.5 (27.9x24.
1)
9.5x9.5 (24.1 x24.1)
L7S10
1 (28.32)
13.5X13.5 (34.3X34.3) 13.5x12 (34.3x30.5)
-12x12
(30:5x30.5)
L7S12
1.25 (35.4)
14.5X14.5 (36.8X36.8)
14.5x13 (36.8x33) 13x 13 (33x33)
L7S15
2 (56.64)
16.5x16.5 (42x42)
16.5x16 (42x38.1) 1
5x1
5 (38. 1 x38. 1 )
4