Owner's Manual

{fKICKER
Models:
Authorized
KICKER Dealer:
Purchase
Date:
Enclosure Model
Number:
Enclosure Serial Number:
IMPORTANT
SAFETY
WARNING
SOLO-BARIC
L7
SUBWOOFER
ENCLOSURE OWNER'S
MANUAL
DL7S12
I VL7S12
I TL7S10
Prolonged
continuous operation of
an
amplifier,
speaker, or subwoofer
in
a distorted,
clipped
or over-
powered manner can cause your audio system to overheat,
possibly
catching
fire
and
resulting
in
serious
damage to your components and/or vehicle. Amplifiers
require up to 4 inches
(1
Ocm)
open ventilation.
Subwoofers
should be mounted with
at
least
1 inch (2.5cm)
clearance between the front of the speaker and
any surface.
CHECK
THE
LOAD
The
Solo-Baric
L7
subwoofer
enclosures
are
internally
wired for a
2 ohm
load at the speaker-wire
connection terminal.
Check to see
if
your amplifier
is
optimized to drive this
load.
SOLO-BARIC
L7
ENCLOSURES
The Solo-Baric-series enclosures
combine
KICKER's
award-winning
line
of subwoofers
with computer-modeled and human fine-
tuned
enclosures
to offer a
level
of bass
performance never before thought
possible
from a
commercially available, ready-to-install
subwoofer system. The
VL
7S 1 2
enclosure
features a 12 inch
Solo-Baric
L7
subwoofer,
the
TL7S1 0 enclosure
features a
10
inch
Solo-Baric
L7 Subwoofer, and the
DL7S12
enclosure features two 12 inch Solo-Baric
L7
subwoofers.
Plug
your subwoofer speaker wire into
the
terminals
using the red connector as
positive and the
black
connector as negative.
Connect the other end of the wire to your
subwoofer amplifier
in
accordance with its
owner's
manual.
Sound Check:
Poor bass response? Check the system phasing by reversing the positive and negative
speaker connections on the subwoofer.
If
the bass improves, then the subwoofer was out of phase
in
reference to the rest of the audio system.
Pro Tip:
With a
KICKER
10
amplifier,
a pair of
KICKER OS speakers, and a few
KICKER cables,
you're
looking
at a
full
system upgrade that
will
dominate!
KICKER amplifiers
and accessories make
it
easy to
upgrade with your existing or stock source unit. Ask your
dealer
about
KICKER amplifiers
and speaker
upgrades to
complete
your system!
Note:
The use of a subsonic
filter
will
significantly
increase power
handling.
The power
handling
specification
in
this chart
is
calculated
using a 25Hz, 24dB/octave subsonic
filter.
2