Manualshelf

User Manual

ManualsBrandsKICKER ManualsCar AudioKICKER - CanAm X3 Phase 5, Kicker/SSV Works 5 Speaker Vehicle Specific Solution - Black
12345678910
10
USB/AUX INPUT PORT INSTALLATION
S
S. Remove the (4) T30 torx on the front and inside of the glove box
T. Remove push clips from underneath glove box.
T
U
U. Pull up and remove the glove box.
V
V. Drill a 1” hole through the left side of the glove box for wiring
W W
W. Unscrew and remove the plastic nut from the port. Make sure to open the fuse
holder and remove the fuse so the nut will t through it. Feed in the wires through
the hole. Keep the fuse holder open and empty until it has passed through the hole.
X
X. Feed the plastic nut back through the wires and cables and screw
back on to the port. Hand tighten only.
outside viewinside view inside view