User Manual

15
X3-US10K
2016+ Can-Am Maverick x3
10” Under Seat Enclosure
SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: [phone] | Fax: [phone]
!
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects
in material or workmanship. All SSV Works Electronics are covered by a limited 1 year
warranty against defects in material or workmanship. All SSV Works Speakers are
covered by a limited 1 year warranty against defects in material or workmanship. Labor
for replacement of defective components is not covered. Contact SSV Works for further
warranty information.
1. X3-US10 Enclosure
2. B-H1220 Subwoofer
Bridge Adapter
3. M6 x 16mm Screws x 10
4. M6 Washers x 10
TOOLS NEEDED FOR INSTALLATION PARTS LIST
PARTS LIST IMAGES
5. M6 x 25mm
Screw x 1
6. Large washers x 2
7. D-Brackets x 2
8. A-Bracket x 1
2. M6 x 16mm Screws x 10 2. B-H1220 Subwoofer
Bridge Adapter
7. A-Bracket x 1
11. M6 Locking Hex Nut
8. B-Bracket x 1
12. Foam Strips x 3
3. M6 Washers x 10 4. M6 x 25mm Screw x 1
5. Large washers x 2
9. Seat Risers x 2
1. X3-US10 Enclosure
6. D-Brackets x 2
10. Small Spacer x 1
- 10mm Socket or Wrench
- T-30 Torx Driver
- T-40 Torx Driver
9. B-Bracket x 1
10. Seat Risers x 2
11. Small Spacer x 1
12. M6 Locking Hex Nut
13. Foam Strips x 3