User Manual

ManualsBrandsKICKER ManualsCar AudioKICKER - CanAm X3 Phase 5, Kicker/SSV Works 5 Speaker Vehicle Specific Solution - Black

F. Place B-Bracket to the left side of the enclosure and slide the tab underneath the enclosure. (F1) Line up the 2 screw holes and proceed to hand thread

the M6 screws and washers. Use a T30 Torx bit to tighten screws. Repeat for the right side. (F2) Line up the top of bracket A and B with the holes on

the factory seat brakcet. Screw in the M6 screw with the large washer (F3).

F1 F2 F3

WIRING INSTRUCTIONS

PXA 500.1

B-H1220

B-H1152

Speaker

Output