User Manual

19
X3-F4
2017+ Can-Am Maverick x3 & x3 Max
4” Speaker Dash Pods
SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: [phone] | Fax: [phone]
!
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects
in material or workmanship. All SSV Works Electronics are covered by a limited 1 year
warranty against defects in material or workmanship. All SSV Works Speakers are
covered by a limited 1 year warranty against defects in material or workmanship. Labor
for replacement of defective components is not covered. Contact SSV Works for further
warranty information.
1. X3-F4 Enclosures (1 pair)
2. Acoustic Lens (1 pair)
3. M6 x 1.0 Screws x 4
TOOLS NEEDED FOR INSTALLATION
PARTS LIST
PARTS LIST IMAGES
4. M6 x 25mm Screws x 2
5. M6 Washers x 6
6. 10mm Nut x 2
3. M6 x 1.0 Screws x 4
4. M6 x 25mm Screws x 2
2. Acoustic Lens (1 pair)
1. X3-F4 Enclosures
(1 pair)
5. M6 Washers x 6 6. 10mm Nut x 2
- T-30 Torx Driver
- Drill 1/4” Drill bit
- 10mm Wrench or Rachet
- Utility Knife