User Manual

21
E. Place the acousic lens on top of the factory grille, line up
the holes and insert the (2) top M6x1.0 (shorter) screws and
washers.
F. Place the speaker pod under the dash panel and line up the
holes on the speaker pod with the (2) top screws and loosely
mount the pod to the dash panel.
H. Installation is complete. Refer to wiring instruction below.G. Insert the M6x25mm screw by pushing it through the acoutic lens,
dash panel and speaker pod. Secure screw using washer and
10mm nut. Now fasten the previous (2) M6x1.0 screws.
E F
HG
WIRING INSTRUCTIONS
PXA 300.4 Amp
B-H1149
Harness
Front
Speaker
Output