User Manual

8
AMP PLATE INSTALLATION
L
N O
K
M
K. From underneath driver side place amp plate between the two cross bars behind the steering wheel.
L. Make sure the threaded bolt on the amp plate goes through the
factory hole located in the corner where the cage tubing connects.
* If your vehicle is equipped with an aftermarket cage, refer to page 2
for the installion of the amp tray.
N. Make a pilot hole with a pick tool through the top right screw hole in
the amp plate and push all the way through the vehicle panel.
O. Drill a larger hole through the pilot hole using a 1/4” drill bit. Be sure
to move the amp plate out of the way before drilling.
M. Secure the amp tray to the vehicle using the supplied M6 nut and
washer.
K