-G) -® CWR Mounting Hole Cover Install Sheet 48CWR+B-20200617
Sealed Enclosures I Caja Sellados I Geschlossenen Gehausen I Enceintes Closes Minimum Sealed M1nimo Sellado Maximum Sealed Maxima de Sellado Volume ft 3 [L] and Power Handling Volumen, pies3 [LI y Procesamiento de potencia Volume ft3 [LI and Power Handling Volumen, pies3 [L] y Procesamiento de potencia Minimale Sealed Minimum Etanches Maximale Sealed Maximum Etanches Volumen L und Belastbarkeit Volume pied au cube [L] et Puissance admissible Volumen L und Belastbarkeit Volume pied au cube [LI
Vented Enclosures I Caja Ventilados I Bassreflex-Gehause I Enceintes Aerees For the vented enclosures the displacement of the pert must be calculated and added to the internal volume of the final design. Use the outer dimensions of the pert and multiply "X x Y x Z", then convert to cubic feet. For example, the CWR12 Vented Minimum design's external port dimensions are, using 3/4" (1.9cm) MDF: (12.5" + 1.5" total MDF wall thickness) x (2.5" + 1.5" total MDF wall thickness) x (20") x {1 ft3 / 1728 in 3 ) = .
Vented Enclosures I Caja Ventilados I Bassreflex-Gehause I Enceintes Aerees Vented Minimum CWRB CWR10 CWR12 CWR15 Box Volume, ft3 (L] .8 (22.7] 1.25 (35.4] 1.75 (49.6] 3 (85] Port Opening, in. x in. [cm x cm] 1.5X8 [3.8X20.3] 2X10.5 [5.1X26.7] 2.5X12.5 (6.4X31.8] 2 75X15 5 [7X39.4] Port Length, in. [cm] 20.75 (52] 20 (50.8] 20 (50.8] 25.75 (65.4] Power Handling, RMS 300 400 500 800 Vented Maximum CWRB CWR10 CWR12 CWR15 Box Volume, ft 3 (L] 1.2 (34] 1.75 [49.6] 2.25 (63.
{fKICKER CWR® Subwoofer CWRB CWR10 CWR12 CWR15 Recommended Amplifier Power [Watts RMS] 150-300 200-400 250-500 400-800 Peak Power Handling [Watts] 600 800 1000 1600 Rated Impedance [O] 2 or4 2 or4 2 or 4 2 or 4 Outer Frame Dimension [in, cm] 8-1/2, 21.6 10-5/8, 27 12-1/2, 31.8 15-3/8, 39.1 Mounting Depth [in, cm] 4-1/8, 10.5 5-1/4, 13.3 5-3/4, 14.5 7-15/16, 20.1 Mounting Cutout [in, cm] 6-15/16, 17.7 9-1/8, 23.1 11, 27.
