KMA AMPLIFIERS Owner’s Manual KMA150.2 KMA360.4 KMA600.4 KMA600.
KMA MULTI-CHANNEL SERIES AMPLIFIERS OWNER’S MANUAL MODEL: KMA150.2 | KMA360.4 | KMA600.4 | KMA600.6 IMPORTANT SAFETY WARNING PROLONGED CONTINUOUS OPERATION OF AN AMPLIFIER, SPEAKER, OR SUBWOOFER IN A DISTORTED, CLIPPED OR OVER-POWERED MANNER CAN CAUSE YOUR AUDIO SYSTEM TO OVERHEAT, POSSIBLY CATCHING FIRE AND RESULTING IN SERIOUS DAMAGE TO YOUR COMPONENTS AND/OR VEHICLE. AMPLIFIERS REQUIRE UP TO 4 INCHES (10CM) OPEN VENTILATION. SUBWOOFERS SHOULD BE MOUNTED WITH AT LEAST 1 INCH (2.
source unit high-level speaker outputs to amplifier core conductor KICKER KISL (optional) OR + to amplifier – shield from source unit highlevel speaker outputs Install a fuse within 7” (18cm) of the battery and in-line with the power cable connected to your amplifier. Model External Fuse Power/Ground Wire KICKER Wiring Kit (sold separately) KMA150.2 1 x 40 Ampere 8 Gauge KMPK8, PK8, CK8 KMA360.4 1 x 60 Ampere 8 Gauge KMPK8, PK8, CK8 KMA600.
STEREO OPERATION minimum impedance of 2 ohm (KMA600.
For multiple amplifier installations where distribution blocks are used, each amplifier should have its proper-rated fuse, or breaker, installed between the amplifier and the distribution block within seven inches of the block, or on the distribution block if it provides for fusing.
OPERATION Automatic Turn-On Selection: The KMA series offers two different automatic turn-on modes that can be selected on the end panel; +12V and DC Offset. • Remote Turn-On: Run 18 gauge wire from the Remote Turn-On Lead on your source unit to the blue REM wire on KEY amplifier’s wiring harness. This is the preferred automatic turn-on method. • If 12V remote turn-on is not available, DC Offset turn-on can be used if speaker-level (high-level) audio inputs are being used.
TROUBLESHOOTING If your amplifier does not appear to be working, check the obvious things first such as blown fuses, poor or incorrect wiring connections, incorrect setting of crossover switch and gain controls, etc. There are Power (PWR) & Protection (PRT) LEDs on the side panel of your Kicker KMA series amplifier. Depending on the state of the amplifier and the vehicle’s charging system, the LEDs will glow either green or red.
KICKER will now provide a three-year warranty with all KXASeries Amplifier purchases paired with a qualifying KICKER Installation Kit* . This extends the standard warranty by an additional year. Amplifier and Kit must be purchased from an Authorized KICKER Dealer. KICKER KMA amplifier success is currently at an unheard-of rate, making the extended warranty program even more beneficial to you. Using poor-quality, under-spec wiring kits will impede KMA amplifier performance.
ELECTRONICS LIMITED WARRANTY When purchased from an Authorized KICKER Dealer, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase with receipt. If this product is identified as “Refurbished” or “B Goods”, the warranty is limited to a period of THREE (3) MONTHS from the date of original purchase. In all cases you must have the original receipt.
INTERNATIONAL WARRANTY Contact your International KICKER dealer or distributor concerning specific procedures for your country’s warranty policies. WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing! Turning up a system to a level that has audible distortion is more damaging to your ears than listening to an undistorted system at the same volume level.
Company Name: Grupo Monsiry S. de R.L. de C.V. Address: Ave. Baburias #14171 int. B Fracc. Jose Sandoval Tijuana, B.C.
KMA MULTICHANNEL AMPLIFIER | AMPLIFICADOR DEL KMA VERSTÄRKER DER KMA |AMPLIFICATEUR DE KMA KMA150.2 | KMA360.4 | KMA600.4 | KMA600.
Wiring | Cabelado | Câblage | Verkabelung See owner’s manual for information on how to use amplifier features such as gain, crossover, bass boost and more! (KMA600.6 shown) (Se muestra KMA600.6) (KMA600.6 illustré) (KMA600.6 gezeigt) Consulte el manual del propietario para obtener información sobre cómo utilizar las funciones del amplificador, como ganancia, crossover, refuerzo de graves y más.
