Owner's Manual

OPERATION
Playback
Use the
MODE
button to choose the input source for the
KMC2:
Bluetooth, USB,
AUX,
and TUNER.
The KMC2 will
automatically enter Bluetooth pairing
mode
when there
is
no Bluetooth connection, with the display message
"BT MUSIC".
When you begin scanning for devices on your audio device, the
KMC2 will
identify as
"Media Center".
The USB
input source is
only available
when there is a USB
device
connected. The
KMC2 will
automatically switch to
USB
input when
a
USB
device
is
connected and detected.
KICKER
recommends
SANDISK
drives for the best performance.
In
testing, the
KMC2 has
been shown to work with some
HOD's,
however, this is
not
supported
by
KICKER!
Drives must be formatted
in
FAT16 or FAT32 fi
le
systems.
Use the
BND
button to
cycle
through the 5
available
radio tuner
bands: FM1, FM2, FM3,
AM1
and AM2.
Settings
Press
&
Hold
the
MODE
button to enter the settings menu. The
available settings are: Bass, Treble, Balance, Fader, Beep,
EO,
Loud,
Area, and
Preset
Volume. Use the
VOL-
&
VOL+
buttons
to
change
the
available
values for each setting.
9
BEEP
-
select whether the
KMC2
responds with beeps
EO
-
select between
EO
presets:
Flat, Classical,
Pog
Rock,
and
Off
LOUD -
select
On
or
Off
for a
low
frequen
cy
boost
AREA-
select North America
or
Europe.
P-VOLUME - select the default volume level
fo
r the K
MC2