Owner's Manual

TROUBLESHOOTING
If
your KMC2 does not appear
to
be working, check the obvious things first such as blown fuses, poor or incorrect wiring connections
etc.
If
you're using
an
amplifier, check for incorrect setting of crossover switches and gain controls etc.
No
or
low output?
OCheck
the balance control on the KMC2.
&Check
the speaker output connections.
oP
ower
cyc
le
the KMC2.
Reduced volume?
Reverse a speaker connection from positive to negative on the stereo channel(s);
if
the volume improves, the
speaker was out of phase.
Factory reset:
Reset the KMC2 to factory default settings by pressing and holding the
MODE
button for eight seconds.
If
you have more questions about the installation
or
operation
of
your new
KICKER
product, see the Authorized
KICKER
Dealer where
you made your purchase.
Please
E-mail [e-mail]
or
call
Technical Services (405) 624-8
583
for unanswered or specific
questions.
10