Amplifier Technical Manual

GROUND
REMOTE
TURN-ON
BATTERY
+12V
FUSE
RIGHT SPEAKER(S) LEFT SPEAKER(S)
+
_
+
_
18"
or less
2 Ω Min. 2Ω Min.
SIGNAL IN
When the amplifier is driving speakers that do not require a crossover, the crossover switch may be set to the OFF position. This will allow the speakers to play full range. OR... If the amplifier is driving speakers that do require a crossover, set the
switch to HI PASS. This will allow only high frequencies to pass through the amplifier to the speakers.
To Left Speaker

-
To Right Speaker

-
System Diagrams
KX100.2 Stereo Mode
KX100.2 & KX200.4 Technical Manual
Version 2.0
Page 11