Owner's Manual

Use the push terminals to wire your subwoofer in series or parallel.

L7 subwoofers are available with dual 2 (ohm) or dual 4 voice coils. Both

coils must be connected to a source of ampliﬁ cation. The dual 2 woofer

will generate a 1 load if the coils are wired in parallel or a 4 load in series.

The dual 4 woofer will provide a 2 load wired in parallel or 8 load wired

in series. The terminals with the white dots are for the ﬁ rst voice coil. The

terminals with solid-red and solid-black markings are for the second voice coil.

coil 1

+ coil 2+ coil 2-coil 1-

WIRING

Paralleled Wiring Series Wiring

Dual 2 Voice Coils = 1 Load

Dual 4 Voice Coils = 2 Load

Dual 2 Voice Coils = 4 Load

Dual 4 Voice Coils = 8 Load

ampliﬁ er

ampliﬁ er +

ampliﬁ er -

Pro Tip: With a KICKER IQ ampliﬁ er, a pair of KICKER QS

speakers, and a few KICKER cables, you’re looking at a full

system upgrade that will dominate! KICKER ampliﬁ ers and

accessories make it easy to upgrade with your existing or

stock source unit. Ask your dealer about KICKER ampliﬁ ers

and speaker upgrades to complete your system!

2015 L7 Subwoofers Manual Rev G.indd 42015 L7 Subwoofers Manual Rev G.indd 4 11/6/2014 9:25:57 AM11/6/2014 9:25:57 AM