- KICKER Midbass drivers Features NEW FOR 2002 RMB6, RMB8

ManualsBrandsKicker ManualsCar SpeakersRMB6

Congratulations! You have just purchased one of the latest in a

long line of exceptional car audio products from Stillwater Designs.

Your KICKER Midbass drivers were designed and engineered by the

same team which created many other international award winning

KICKER products like the Solo-Baric

ﬁ

, Comp VR and Resolution driv-

ers. It contains a number of cutting-edge features to give you out-

standing performance and dependability. Thanks for buying KICKER.

Enjoy.

Features

NEW FOR 2002!

•Ultra Slim Midbass Drivers Gives you

real

low frequency output from factory loca-

tions.

•CIMP (Curvilinear Injection-Molded Polygraphite) Woofer Cones For smooth

extended frequency response.

•Santoprene Surround Tough, flexible surround with long throw, to control extreme

cone excursions.

•Blackened Motor Structure and Kapton™ Voice Coil Formers For exceptional

thermal power handling capability.

•SSD (Spun Spoke Design) Enhances the cosmetics and provides a solid anti-resonant

foundation for the motor assembly.

•Spring Loaded Nickel Plated Terminals For solid connections with large gauge

speaker wire.

RMB6 / RMB8

Specifications

MODEL

Frequency Power Cut Out Mounting Depth Sensitivity

Response Peak / RMS (in. / cm) (in. / cm) (1 W / 1 M)

RMB 6

30-500 250 / 125

5/8 / 14.29

/ 5.08 88

RMB 8

30-500 350 / 175

1/4 / 18.42

1/4 / 5.8 89

Available in 4 ohm models only.

Summary of content (4 pages)

PAGE 1
RMB6 / RMB8 Congratulations! You have just purchased one of the latest in a long line of exceptional car audio products from Stillwater Designs. Your KICKER Midbass drivers were designed and engineered by the same team which created many other international award winning KICKER products like the Solo-Baricfi , Comp VR and Resolution drivers. It contains a number of cutting-edge features to give you outstanding performance and dependability. Thanks for buying KICKER. Enjoy.
PAGE 2
Installation Instructions Your KICKER drivers are specifically designed for mounting in free-air applications. While the speakers do not require a sealed enclosure for optimum performance, it is important to isolate the sound coming off the front of the driver from the sound radiating from the back of the driver. This isolation is usually accomplished by using the correct size driver in a factory speaker location.
PAGE 3
Wiring Your Midbass driver has two spring loaded terminals. The red terminal is connected to the positive wire and the black terminal is connected to the negative wire from the source unit or amplifier. Since your midbass drivers have a limited frequency range it is recommended to use a bandpass crossover. Use either a passive unit to connect into an existing system or for higher performance, an electronic crossover and a dedicated amplifier.
PAGE 4
SPEAKER SYSTEMS LIMITED WARRANTY Stillwater Designs warrants this product to be free from defects in material and workmanship under normal use for a period of one (1) year from date of original purchase from an Authorized Kicker Dealer, unless this product is labeled “B Stock”, in which case it is warranted for ninety (90) days from date of purchase.