X SOLOXSUBWOOFER S10XSP, S12XSP SPAIRASSEMBLY ©2007 Stillwater Designs
SOLOXSUBWOOFER SPAIRASSEMBLY Owner’sManual Installation 1. To begin installation, start by removing the old SPAIR (Simple Pull Apart Insertable Replacement) from the BAM (Basket and Motor Assembly) as shown below. S12XSP / S10XSP Models: Figure 1 Congratulations on your KICKER purchase Please record your purchase information and keep your sales receipt for validation of warranty.
2. After carefully removing the new SPAIR from the shipping container, remove the Coil Cap from the new SPAIR assembly. Coil Cap Figure 9 Figure 4 a. Carefully remove the Coil Cap from the new d. Fit the new SPAIR to the BAM with the SPAIR assembly while avoiding damage to the voice coils. 10-24 Acorn Head Bolts. We have enclosed four (4) extra Acorn Head Bolts. BAM INSTALLATION New SPAIR 3. Connect the wiring to the four binding posts on the new SPAIR.
WARRANTY AcousticsLimitedWarranty InternationalWarranty Kicker warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) MONTHS from date of original purchase with receipt. When purchased from an Authorized KICKER Dealer it is warranted for ONE (1) YEAR from date of original purchase with receipt. In all cases you must have the original receipt.
