User's Manual

General Information
P/N 45-N1230M-002 1-3 February 2005
1-3 SAFETY CAP
These instructions must be followed in the exact sequence as written to prevent serious injury,
death and/or property damage.
Each Kidde Engineered System cylinder is factory equipped with a safety cap installed on the
cylinder outlet. This device is a safety feature and will provide controlled, safe discharge when
installed in the event the container is accidentally actuated.
The safety cap must be installed on the container outlet AT ALL TIMES except when the
containers are connected to the system piping.
For additional information on safe handling of compressed gas containers, see CGA Pamphlet P1
titled “Safe Handling of Compressed Gases in Containers.” (CGA pamphlets may be purchased
from the Compressed Gas Association, Crystal Square Two, 1725 Jefferson Davis Highway,
Arlington, VA, 22202).