Specification

ManualsBrandsKidde ManualsElectricalBattery Operated Smoke Detector with Ionization/Photoelectric Dual Sensors

Dual Sensor, Battery Operated

Photoelectric / Ionization Smoke Alarm

Model PI9010 (Formerly Model PI9000)

Dual Sensor

Contains both a photoelectric and ionization sensor

providing dual sensor protection in your home.

Hush

Feature

Temporarily silences nuisance alarms.

Red LED

Flashes every 30-40 seconds to indicate that

the smoke alarm is operating properly.

Test/Reset Button

Tests unit’s electronic circuitry and horn.

Description

The Kidde PI9010 is a 9V battery powered smoke alarm.

This smoke alarm functions as a single unit smoke alarm

and features Hush

, allowing you to quickly silence nui-

sance alarms. The PI9010 is easy to install, no wiring is

required.

This smoke alarm combines both photoelectric and

ionization sensors. Ionization sensing alarms may detect

invisible fire particles (associated with flaming fires) soon-

er than photoelectric alarms. Photoelectric sensing alarms

may detect visible particles (associated with smoldering

fires) sooner than ionization alarms.

Kidde strongly recommends that both ionization

and photoelectric smoke alarms be installed to help

insure maximum detection of the various types of

fire that can occur within the home.

The Kidde PI9010, 9V battery powered smoke alarms

provides continuous protection against smoke and fire

hazards even during power outages. The PI9010 also

includes flashing LEDs to signal the alarm is functioning

properly, a low battery warning and a loud 85dB alarm.

The Kidde PI9010 is UL listed and offers a 10-year limited

warranty.

Features and Benefits

• IonizationSensor – may detect invisible fire

particles (associated with flaming fires) sooner

than photoelectric alarms.

• PhotoelectricSensor – may detect visible particles

(associated with smoldering fires) sooner than

ionization alarms.

• BatteryOperated(9Vbatteryincluded) – Provides

continuous protection even during power outages.

• TamperResistant – Deters from tampering or theft.

• Hush

Feature – Temporarily silences nuisance alarms.

• RedLED – Flashes every 30-40 seconds to indicate that

the smoke alarm is operating properly.

• Test/ResetButton – Tests smoke alarm circuitry and

horn.

Summary of content (2 pages)

PAGE 1
Dual Sensor, Battery Operated Photoelectric / Ionization Smoke Alarm Model PI9010 (Formerly Model PI9000) Dual Sensor Contains both a photoelectric and ionization sensor providing dual sensor protection in your home. Hush® Feature Temporarily silences nuisance alarms. Red LED Flashes every 30-40 seconds to indicate that the smoke alarm is operating properly. Test/Reset Button Tests unit’s electronic circuitry and horn.
PAGE 2
Dual Sensor, Battery Operated Photo/Ion Smoke Alarm Model Pi9010 Architectural and Engineering Specifications The unit shall at a minimum meet the requirements of UL217, NFPA72, (chapter 11, 2002 edition) The State of California Fire Marshall, NFPA101 (One and two family dwellings) Federal Housing Authority (FHA), Housing and Urban Development (HUD). It shall also include a 10-year manufacturer’s limited warranty. The smoke alarm shall be Kidde Model PI9010 or approved equal.