Installation Guide

6
7 7
Operating Instructions
Mode Green Amber Red Comment
Startup – Wait for
Link status active
Off Off Blink twice per
second
System will wait for
link status active
before going into
standby
Enroll – Waiting
for setup button
press
Off Off On for 1 second,
off for 1 second
Wait for monitor to
direct user to press
button on monitor
Enroll - Registration
window open
Off Off Flashes rapidly
(4 times a second)
tap “enroll my
monitor” on app
Link lost after
enrollment
Off Off Once per second Check status of
wireless router
Smoke Learning Off 1 sec on/
1 sec off
Off Test Smoke alarm
CO Learning Off 100 ms on/
1 sec off
Off Test CO alarm
Standby On Off Off Test monitor and
alarms weekly
Test Mode – Step
1: Acoustic
Self-Test
On/Off On/Off On/Off Wait for Self-test to
complete, app will
show status.
Test Mode- Step
2: Alarm Test
Once per
second
Off Off Test alarm furthest
from monitor, multiple
alarms can be test.
Test mode will exit
2 minutes after last
alarm is detect.
Alarm Detected Off Off Flashes rapidly
with a one second
pause.
Follow instructions
supplied with your
alarm.
Snooze mode Once
every
two
seconds
Off Off Monitor detected pat-
tern but notifications
have been disabled
for 10 minutes.
Ignore Mode Once
every 5
seconds
Off Off
Monitor detected
pattern but owner has
dismissed alert. Monitor
will provide alert next
time alarm is heard.
Fault Notification Off On Once per second Unplug monitor and
plug back in, run test
to verify operation.
RemoteLync LED Indicator Operation