Use and Care Manual

Operating Instructions

Features:

• The RemoteLync monitor listens for smoke and carbon mon-

oxide alarm events, and can notify you via your mobile app

on your smart device while you are outside of your home.

• Voice prompts will guide you through the set up and testing

process of your monitor.

• Hush feature allows you to stop notiﬁcations while you deal

with a known alarm situation.

• Green, Red, and Amber LEDs indicate status of the monitor.

• Powered by 120V AC (60 Hz, 20mA max)

Warning: The RemoteLync monitor is not an alarm. Your

RemoteLync monitor will recognize alarm signals from most

UL-approved smoke and CO alarms manufactured after 1999.

Section 1: Location Guide

IMPORTANT: THIS MONITOR MUST BE PLUGGED INTO A

STANDARD 120VAC, 60Hz OUTLET, LOCATED IN A CEN-

TRAL LOCATION WITH CLEARANCE AROUND IT TO ALLOW

ALARM SOUNDS TO REACH THE MONITOR.

Avoid these locations:

--Dirty, dusty places, such as garages, furnace rooms, near win-

dows or external doors

--Insect infested areas

--Areas of direct sunlight

--Humid areas such as bathrooms, or any area above 95% rela-

tive humidity (RH).

--Kitchens

--Any areas colder than 40F (4.4C) or hotter than 100F (37.8C).

Extreme temperatures may affect the performance of the

RemoteLync.

--Near ﬂuorescent lights as electronic noise may cause nuisance

alarms (Install at least one (1) foot away).

--Avoid locations where sound waves might be blocked from

reaching the monitor, such as behind drapes or other objects.