SDS

SAFETY DATA SHEET
Commercial ABC Dry Chemical
(Fire Extinguishing Agent, Pressurized and
Non-pressurized)
Revision Date: October 1, 2015 Page 3 of 10
3.
COMPOSITION/INFORMATION ON INGREDIENTS
This product is a mixture.
Component
CAS Number
Concentration
Monoammonium Phosphate
7722-76-1
55 - 65%
Ammonium Sulfate
7783-20-2
30 - 40%
Mica
12001-26-2
< 5%
Clay
1332-58-7
< 5%
Amorphous Silica
7631-86-9
< 5%
Dye
NA
<1%
Note: Pressurized product uses nitrogen or compressed air as the expellant.
4.
FIRST- AID MEASURES
Description of necessary first-aid measures
Eyes
Immediately flood the eye with plenty of water for at least 15 minutes, holding the eye open. Obtain
medical attention if soreness or redness persists.
Skin
Wash skin thoroughly with soap and water. Obtain medical attention if irritation persists.
Ingestion
Dilute by drinking large quantities of water and obtain medical attention.
Inhalation
Move victim to fresh air. Obtain medical attention immediately for any breathing difficulty.
Most important symptoms/effects, acute and delayed
Aside from the information found under Description of necessary first aid measures (above) and Indication
of immediate medical attention and special treatment needed, no additional symptoms and effects are
anticipated.
Indication of immediate medical attention and special treatment needed
Notes to Physicians
Treat symptomatically.
5.
FIRE - FIGHTING MEASURES
Suitable Extinguishing Media
This preparation is used as an extinguishing agent and therefore is not a problem when trying to control a
fire. Use extinguishing agent appropriate to other materials involved. Keep pressurized containers and
surroundings cool with water spray as they may rupture or burst in the heat of a fire.
Specific hazards arising from the chemical
Pressurized containers may explode in heat of fire.
Special Protective Actions for Fire-Fighters
Wear full protective clothing and self-contained breathing apparatus as appropriate for specific fire
conditions.