Brochure
AC/DC Powered, Plug-In
Carbon Monoxide Alarm
Architectural and Engineering
Specifications
The carbon monoxide alarm shall be Kidde Model KN-COB-DP2
or approved equal. It shall be powered by a 120V AC, 60 Hz
source, along with 2 AA backup batteries. The temperature
operating range shall be between 40°F and 100°F (4°C and
38°C) and the humidity operating range shall be between 10%-
95% relative humidity, non-condensing.
The CO sensor shall be of a fuel cell design and shall
meet the sensitivity requirements of Underwriters Laboratories
UL2034 Single and Multiple Station Carbon Monoxide Alarms.
The alarm shall include a test/reset button. If pressed and
released during normal operation, it shall electronically simulate
the presence of CO and cause the unit to go into alarm. This
sequence tests the unit’s electronics to ensure proper operation.
If pressed during alarm mode, the unit will be silenced and will
begin monitoring CO levels again.
In accordance with UL 2034, the CO sensor will not alarm to
levels of CO below 30 ppm and will alarm in the following time
range when exposed to the corresponding levels of CO.
70 ppm CO concentration 60 – 240 minutes
150 ppm CO concentration 10 – 50 minutes
400 ppm CO concentration 4 – 15 minutes
The alarm shall include a piezoelectric horn that is rated at 85
decibels at 10 feet. When the unit detects carbon monoxide,
the alarm pattern will be four (4) short beeps – followed by five
(5) seconds of silence – followed by four (4) short beeps.
The unit shall contain an End of Life Notification. Ten (10)
years after the alarm is first powered, it will chirp two times
every 30 seconds to indicate it is time to replace the alarm. The
End of Life Hush feature will allow the end of life “chirps” to be
silenced for 3 day intervals for a total of 30 days. The unit shall
be listed to UL 2034. It shall include a 10 year manufacturer’s
warranty.
Technical Specifications
Model: KN-COB-DP2
Power Source: 120VAC, 60 Hz 60mA max.,
2-AA battery backup
Sensor: Electrochemical
Audio Alarm: 85dB at 10ft
Temperature Range: 40˚F (4˚C) to 100˚F (38 ˚C)
Humidity Range: 10%-95% relative humidity (RH)
non-condensing
Size: 2.75”W x 4.5”H x 1.5”D
Weight: .5lb
Interconnects: No
LED: Green, Normal; Red, Alarm
Warranty: 10 year limited
Ordering Information
Ordering Pack Pack Dimensions Cartons/
Number UPC I 2 of 5 Cong Qty (w x d x h inches) Weight Pallet
21025759 0-47871-25759-1 100-47871-25759-8 Clam 2 5.9 x 7.9 x 11.6 1.2 111
21025761 0-47871-25761-4 N/A Bulk Pack 6 6.3 x 12.2 x 7.1 4.75 126
21025763 0-47871-25759-1 200-47871-25759-5 Clam 4 7.9 x 11.1 x 11.8 2.4 60
21025764 0-47871-25759-1 300-47871-25759-2 Clam Display 24 16.75 x 21.75 x 43 30 4
21025772 0-47871-25772-0 100-47871-25772-7 Box 6 6.6 x 15 x 4.2 0.45 210
Model KN-COB-DP2
Part Number 900-0263
1016 Corporate Park Drive
Mebane NC 27302
1-800-880-6788
www.Kidde.com
Distributed by:
4.5”
2.75” 1.5”