Instructions / Assembly

58 [e-mail]
A: Using 1 Threaded Clip per chain, join 1 Long Swing Chain to each side of the swing belt seat. Make sure to
close the Threaded Clip tightly using an adjustable wrench. (g. 29.1 and 29.2).
B: Using 1 Threaded Clip per chain, join the Short Swing Chain to the Acro Bar and Acro Handle. Make sure
to close the Threaded Clip tightly using an adjustable wrench. (g. 29.2 and 29.3)
C: Attach the other end of the swing chains to the Quick Clips attached to the swing hangers and make sure all
Quick Links are tightened. (g. 29.1)
Short
Swing
Chain
Swing Seat
Long Swing Chain
Threaded Clip
Tighten Clip using
adjustable wrench
Threaded Clips attach
to seat and Acro bar.
Swing Seat
Chain Link
Acro Bar
Acro Handles
Step 29: Attach Acro and Belt Swings
Other Parts
1 x Acro Bar
2 x Acro Handle
2 x Swing Belt Seat
2 x Short Swing Chain
4 x Long Swing Chain
6 x Threaded Clips
Bolt must not exceed 1/2 thread
past the nut
Fig. 29.1
Fig. 29.2
Fig. 29.3
Warning! Check entire play centre
for bolts protruding beyond t-nuts. Use
extra washers to eliminate this condition.